Warranty and
Regulatory Information
Contents
Overview
Year 2000 Compliance ............................................ 4
ENERGY STAR ............................................................ 4
Limited Warranty: U.S. & Canada .............................. 5
Overnight Exchange: U.S. & Canada ........................ 7
Limited Warranty: LatinAmerica ............................ 10
Oki Data Service Centers ........................................ 11
Specifications.......................................................... 12
Safety Information................................................... 13
Installation Hints ................................................... 13
Operation and Maintenance .................................. 13
Toner Cartridge and Image Drum Unit Handling ..... 14
Emergency First Aid ............................................. 14
Regulatory Information ........................................... 15
Federal Communications Commission (FCC) ........ 15
Industry Canada (IC) ............................................. 18
European Union Council of the European
Communities Statements ................................... 19
Material Safety Data Sheet ...................................... 20
Warranty, Regulatory Information, and Specifications
3
|
®
Year 2000 Compliance
ENERGY STAR
The OKIOFFICE 87 is Year 2000 Compliant. It contains
information technology that accurately processes date
and time data between the years 1999 and 2000, and
carries no issue for the September 9, 1999 (9999) pro-
gramming concern. These products, when used in combi-
nation with products purchased from other manufactur-
ers, whose products properly exchange data and time
information, will accurately process the date and time.
As an ENERGY STAR Partner, Oki Data has determined that
this product meets the ENERGY STAR guidelines for energy
efficiency.
Warranty, Regulatory Information, and Specifications
4
|
Limited Warranty: U.S. & Canada
Overview
Oki Data Americas, Inc. (Oki Data) warrants this
OKIOFFICE 87 to be free from defect in material and
workmanship and will remedy any such defect according
to the terms of this Limited Warranty.
Canada only; see Overnight Exchange) or return the
OKIOFFICE product, shipping prepaid, in the original
shipping container or equivalent, to Oki Data or an
authorized Oki service center and assume the risk of
loss or damage in transit. A written receipt for the
product, showing the date and location of purchase, and
both the model and serial numbers of this printer must
accompany any request or claim for work or exchange to
be performed under this Limited Warranty.
Oki Data will repair (or at its option, replace) at no
charge, any defective component(s) of the OKIOFFICE
87 for one (1) year from the date of purchase except for
the printhead (LED imaging array), which is warranted for
a period of five (5) years from date of purchase. This
Limited Warranty extends to the original purchaser only.
This Limited Warranty does not extend to consumable
items.
This Limited Warranty shall not apply if the product has
been damaged due to abuse, misuse, misapplication,
accident, or as a result of service or modification by any
other than an authorized Oki service center.
To make request or claim for service under this Limited
Warranty the original purchaser has the option to imple-
ment the overnight exchange procedure (U.S. and
Warranty, Regulatory Information, and Specifications
5
|
THEREARE NO EXPRESS WARRANTIES OTHER
THAN THOSE ON THE FACE HEREOFAND DE-
SCRIBEDABOVE. NO WARRANTIES WHETHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIM-
ITED TO,ANY IMPLIED WARRANTIES OF MERCHANT-
ABILITY OR FITNESS FOR A PARTICULAR PUR-
POSE, SHALL EXTEND BEYOND THE RESPECTIVE
WARRANTY PERIOD DESCRIBEDABOVE. Some
states do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to
you.
Additional information on obtaining service under this
Limited Warranty is available by contacting the Oki
dealer from whom the product was purchased, by
contacting Oki Data directly at 1-800-OKI-DATA
(1-800-654-3282; U.S. and Canada, English only) or
1-856-222-7496 (Spanish only), or by contacting one of
the service depots listed on page11.
This Limited Warranty applies to this OKIOFFICE 87.
However, the procedure for obtaining service may vary
outside the continental United States. Contact your Oki
dealer for such warranty service information.
OKI DATA SHALL NOT BE RESPONSIBLE OR LIABLE
FORANY SPECIAL, INCIDENTALOR CONSEQUEN-
TIAL DAMAGES OR LOSS ARISING FROM THE USE
OF THIS PRODUCT. Some states do not allow the
exclusion or limitation of incidental or consequential
damages, so the above exclusion may not apply to you.
This warranty gives you specific legal rights, and you
may also have other rights which vary from state to
state.
Warranty, Regulatory Information, and Specifications
6
|
Overnight Exchange: U.S. & Canada
Overview
Note: Available in the United States and Canada.
in your being charged the full price of the exchange unit.
Before you ship the OKIOFFICE 87, remove the image
drum and toner cartridge to prevent damage to the
OKIOFFICE 87 during shipment: failure to do so may
result in a fee for cleaning/repairs, which will be charged
to your account.
If you choose to use our Overnight Exchange service,
call 1-800-OKI-DATA(1-800-654-3282): our trained per-
sonnel will try to solve your problem over the phone. If
they determine that your OKIOFFICE 87 hardware is
defective, an exchange unit will be shipped to you via air
express. Have your credit card available, as our repre-
sentative will be asking for this information. You will
receive the exchange unit the next business day—or no
later than the second business day.
When Overnight Exchange is used, the returned machine
becomes the property of Oki Data. Exchange units may
be new or repaired/reconditioned, at the option of Oki
Data: the exchange unit becomes the property of the
customer when the returned machine has been picked up
by Oki Data’s designated carrier. The exchange
OKIOFFICE 87 will be warranted for thirty (30) days or
the remaining warranty period of the originally purchased
OKIOFFICE 87, whichever is longer.
Return the original product to Oki Data by using the
same packaging materials you received with the ex-
change OKIOFFICE 87. You must pack the unit accord-
ing to the instructions on the package. The OKIOFFICE
87 to be returned must be made available for pickup by
Oki Data’s representative within 2 business days of your
receipt of the exchange unit: failure to do so may result
Warranty, Regulatory Information, and Specifications
7
|
Overnight Exchange of the OKIOFFICE 87 for a print-
head failure is limited to one year from date of purchase.
For the remaining printhead warranty period, replacement
will be at an authorized service center or authorized third
party service organization. Call 1-800-OKI-DATA
(1-800-654-3282) for authorized service locations using
our depot repair program.
• Major credit card number and information, to
secure the return and condition of the returned
unit. (U.S.: Visa, MasterCard, American Express;
Canada: Visa, American Express; this program is
not available outside the U.S. & Canada.)
Note: This information is kept confidential, and will
only be used if the returned unit is not received,
if no receipt is supplied confirming that the Oki
Data carrier has picked up the package, or if
the unit has been damaged due to improper
repackaging. You will receive a phone call or
letter within two to four weeks of the exchange
date before any charge is initiated.
How to activate your OKIOFFICE 87
Overnight Exchange Warranty
Follow these simple steps to take advantage of your
OKIOFFICE 87 Overnight Exchange Warranty:
1 Call us. If you are having problems with your
OKIOFFICE 87, first contact our support staff at
800-654-3282. (See your User’s Handbook or
forms of support.) Our trained personnel will try to
solve your problem over the phone.
Note: If you cannot supply a credit card number, you
may still have your unit serviced by an
authorized Oki Data service center or service
depot under the terms of the warranty.
2 If they determine that your OKIOFFICE 87 is
3 Fax or mail us the sales receipt for your
OKIOFFICE 87, showing date and location of
purchase, and model and serial number of the unit.
defective, they will ask you for this information:
• The address to send the replacement unit to:
name, company, street address (not P.O. box),
state, ZIP code, and phone number.
Warranty, Regulatory Information, and Specifications
8
|
4 We will ship a replacement OKIOFFICE 87 up to
midnight ET and you should receive it the next
business day—or Saturday if requested on Friday
orders—and no later then two business days. The
replacement will be a repaired/reconditioned “as
new” machine and will require replacement of
consumables—image drum and toner cartridge—
from the original unit.
5 Return the original unit—reuse the packing
material from the exchange unit. Follow the en-
closed instructions to schedule the return ship-
ment—there is no additional cost.
If you have any questions about this process and the
complete warranty coverage and responsibilities please
refer to page 5. If you need more help, contact our
support professionals at 800-654-3282.
Warranty, Regulatory Information, and Specifications
9
|
Limited Warranty: Latin America
Overview
Oki Data warrants this multifunction printer (hereinafter
Product) to be free in defect in material and workman-
ship and will remedy any such defect according to the
terms of this Limited Warranty. This Limited Warranty
does not extend to consumable items, including but not
limited to toner cartridges, fuses, etc.
all transportation charges to the repair center. A written
receipt for the Product, showing the date of purchase,
dealer’s name, and both the model and serial numbers of
the Oki Data Product must accompany any request or
claim for work to be performed under this Limited War-
ranty.
Oki Data will repair (or at its option replace) at no
charge, any defective component(s) of the Product for
one (1) year from the date of purchase except for the
printhead (LED imaging array), which is warranted for a
period of five (5) years from date of purchase. This
Limited Warranty extends to the original purchaser only.
This shall not apply if the Product has been damaged
due to abuse, misuse, misapplication, accident, or as a
result of service or modification by any other than an
authorized Oki Data service center.
THEREARE NO EXPRESS WARRANTIES OTHER
THAN THOSE ON THE FACE HEREOFAND DE-
SCRIBEDABOVE. NO WARRANTIES EXPRESS OR
APPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
PARTICULAR PURPOSE, SHALL EXTEND BEYOND
THE RESPECTIVE WARRANTY PERIODS NOTED
ABOVE.
To make a request or claim for service under this
Limited Warranty the original purchaser must return the
Oki Data Product to Oki Data or an authorized Oki Data
service center within the country purchased. The
purchaser returning the Product for repair must pay for
Warranty, Regulatory Information, and Specifications
10
|
Oki Data Service Centers
Overview
For the most up-to-date listing of Oki Data Service
Centers:
Mexico
Oki Data de Mexico, S.A. de C.V.
Mariano Escobedo No. 748-8 Piso
Col Anzures, E. P 11590
Mexico. DF
• In the U.S. and Canada, call 1-800-OKI-DATA
(1-800-654-3282)
Tel: 525-263-8780
Fax: 525-263-8785
• In Latin America, contact the Latin America Service
Coordinator at Oki Data's Corporate Headquarters at
856-222-7496 (Spanish only)
Brazil
Oki Data do Brasil, Ltda.
United States
Rua Alexandre Dumas, 22220-8 andar
Chácara Sto Antonio
São Paulo 04717-004, Brasil
Oki Data Americas, Inc.
2020 Bishops Gate Blvd.
Mt. Laurel, NJ 08054
Tel: 5511-3444-3500
Fax: 5511-3444-3501
Tel: 1-800-654-3282
Fax: 1-856-222-5247
Canada
Oki Data Americas, Inc.
2735 Matheson Blvd. East. Unit 1
Mississauga, Ontario, Canada, L4W 4M8
Tel: 800-654-3282
Fax: 905-238-4427
Warranty, Regulatory Information, and Specifications
11
|
Specifications
Overview
For additional specifications, see the on-line User’s
Guide.
Environmental
Temperature
Electrical
Operating: 50 to 90°F (10 to 32°C)
Power Off: 32 to 110°F (0 to 43°C)
Storage: 14 to 110°F (-10 to +43°C)
Voltage
120 volts +6%/-15% (102-127V), 50/60 Hz, ±2%
230 volts, +15%/-14% (198-264V), 50/60 Hz, ±2%
Relative Humidity
Operating: 20 to 80% RH
Power Off: 10 to 90% RH
Storage: 10 to 90% RH
Maximum Power
157W
Warranty, Regulatory Information, and Specifications
12
|
Safety Information
Overview
• The TEL port on the back of the unit is only suitable for
2-wire devices. Not all standard telephones will respond
to incoming ringing when connected to an extension
socket.
Installation Hints
• Install your OKIOFFICE 87 MFP in a dust-free
location away from direct sunlight.
• Do not plug your MFP into a power source shared by
equipment which produces electrical noise (i.e., air
conditioners, etc.).
• This equipment may not necessarily provide for the
effective hand-over of a call from a telephone
connected to the same line.
• Leave electronic adjustments to authorized service
personnel.
Operation and Maintenance
• The LINE terminal connects your fax machine to a
standard telephone line. To avoid damage to your
telephone system or to the MFP, do not plug your fax
machine into anything other than a standard RJ-11C
jack.
• Use a dry cloth to clean the control panel and the main
body of the unit.
• Aside from replacing the toner and image drum car-
tridge, do not disassemble or attempt to service this
unit yourself. Refer to a qualified technician for service.
• Your MFP is intended to be grounded electrically and
is equipped with a three-wire grounded power cord. For
your safety, do not attempt to defeat your power cord’s
grounding plug.
• Disconnect the power cord before trying to remove any
objects that may have fallen into the machine.
• When relocating your MFP, always disconnect the
telephone line before disconnecting the power cord,
then reconnect the power cord first.
• The power outlet should be located near the equipment
and should be easily accessible.
Warranty, Regulatory Information, and Specifications
13
|
• This unit is not intended to be used in parallel with any
other telephone devices.
• Do not expose these components to light for more than
five minutes. Never expose the green drum (inside the
image drum unit) to direct sunlight.
• If anything happens that indicates that the MFP is not
working properly or has been damaged, unplug it
immediately and follow the instructions in the “Service
and Support” section of your Setup Guide for having
your MFP serviced. These are some of the things to
look for:
• Always hold the image drum unit by the ends—never
by the middle. Never touch the surface of the green
drum inside the image drum unit.
• Exercise care when removing the toner cartridge. Do
not let it touch your clothing or porous materials. The
toner powder causes permanent stains.
- The power cord or plug is frayed or damaged.
• Small amounts of toner spilled on skin or clothing can be
readily removed with soap and cold water. Using heated
water will make removing the stain much more difficult.
- Liquid has been spilled into the printer, or it has been
exposed to water.
- The MFP has been dropped, or the cabinet is dam-
aged.
Emergency First Aid
- The MFP does not function properly when you’re
following the operating instructions.
• If toner is swallowed: Dilute by giving two glasses of
water and induce vomiting by administering Syrup of
Ipecac (follow manufacturer’s instructions). Seek medi-
cal attention. Never attempt to induce vomiting or give
anything by mouth to a person who is unconscious.
Toner Cartridge & Image Drum Handling
• Leave unused toner cartridges and image drum units in
their packages until needed. When replacing a toner
cartridge or image unit, re-use the packaging to
dispose of the old toner cartridge or image drum unit.
Be sure to dispose of it in an environmentally sound
manner.
• If toner is inhaled: Take person to an open area for
fresh air. Seek medical attention.
• If toner gets in the eyes: Flush eyes with large
quantities of cool water for 15 minutes, keeping eyelids
open with fingers. Seek medical attention.
• See the Material Safety Data Sheet in the back of this
booklet for more information.
Warranty, Regulatory Information, and Specifications
14
|
Regulatory Information
Overview
3 The REN is used to determine the quantity of
devices which may be connected to the telephone
line. Excessive REN’s on the telephone line may
result in the devices not ringing in response to an
emergency call. In most, but not all areas, the sum
of the REN’s should not exceed five (5.0). To be
certain of the number of devices that may be
connected to the line, as determined by the total
REN’s, contact the telephone company to deter-
mine the maximum REN for your calling area.
Federal Communications Commission
(FCC) Requirements for End Users
This device has been granted a registration number by
the Federal Communications Commission, under Part 68
rules and regulations for direct connection to the tele-
phone lines. In order to comply with these FCC rules, the
following instructions must be carefully read and appli-
cable portions followed completely.
1 This equipment complies with Part 68 of FCC rules.
On the back of the equipment is a label that con-
tains, among other information, the FCC registra-
tion number and ringer equivalence number (REN)
for this equipment. If requested, this information
must be provided to the telephone company.
4 If the equipment causes harm to the telephone
network, the telephone company will notify you in
advance. But if advance notice isn’t practical, the
telephone company will notify the customer as
soon as possible. Also, you will be advised of your
right to file a complaint with the FCC if you believe
it is necessary.
2 The following USOC jacks may be used with this
equipment: RJ11C.
Warranty, Regulatory Information, and Specifications
15
|
5 The telephone company may make changes in its
facilities, equipment, operations, or procedures that
could affect the operation of the equipment. If this
happens, the telephone company will provide
advance notice in order for you to make the neces-
sary modifications to maintain uninterrupted ser-
vice.
tariffs. Contact your state Public Utility Commis-
sion, Public Service Commission, or Corporate
Commission for information.
9 This equipment is hearing-aid compatible.
FCC Telephone Consumer Protection Act
The Federal Communications Commission Telephone
Consumer Protection Act of 1991 makes it unlawful for
any person to use a computer or other electronic device
to send any message via a telephone fax machine
unless such message clearly contains in a margin at the
top or bottom of each transmitted page or on the first
page of the transmission, the date and time it is sent and
an identification of the business or other entity, or other
individual sending the message, and the telephone
number of the sending machine or such business, other
entity, or individual.
6 If trouble is experienced with this equipment,
please contact the following for repair and/or
warranty information:
Oki Data Americas, Inc.
2020 Bishops Gate Blvd
Mount Laurel, N.J. 08054
Telephone:(856) 235-2600 or
(800)-OKI-DATA(800-654-3282)
If the trouble is causing harm to the telephone
network, the telephone company may request that
you remove the equipment from the network until
the problem is resolved.
To comply with this law, you must enter the following
information in your fax unit:
• Date and time: see the Setup Guide for instructions on
doing this.
7 This equipment contains no user serviceable parts.
Please contact Oki Data for service.
• Name and telephone number which identify the source
of your fax transmission: see the Setup Guide for
instructions on doing this.
8 This equipment cannot be used on public coin
service provided by the telephone company. Con-
nection to Party Line Service is subject to state
Warranty, Regulatory Information, and Specifications
16
|
A properly shielded interface cable must be used in order
to ensure compliance of this equipment with FCC regula-
tions.
FCC Radio Frequency Interference
Statements
Changes or modifications not expressly approved by Oki
Data may void your authority to operate this device.
120-Volt Models
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
230/240-Volt Models
WARNING: This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harm-
ful interference when the equipment is operated in a
commercial environment. This equipment generates,
uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will
be required to correct the interference at his own ex-
pense.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
the receiver.
It is the responsibility of the user to obtain the required
shielded cable in order to ensure compliance of this
equipment with FCC regulations.
• Plug the unit into an outlet on a circuit different from
that to which the receiver is connected.
Changes or modifications not expressly approved by Oki
Data may void your authority to operate this device.
• Consult the dealer or an experienced radio television
technician for help.
Warranty, Regulatory Information, and Specifications
17
|
Repairs to certified equipment should be made by an
authorized Canadian maintenance facility designated by
the supplier. Any repairs or alterations made by the user
to this equipment, or equipment malfunctions, may give
the telecommunications company cause to request the
user to disconnect the equipment.
Industry Canada (IC) Requirements for End
Users
The Industry Canada label identifies certified equipment.
This certification means that the equipment meets
certain telecommunications network protective, opera-
tional and safety requirements. The Department does not
guarantee the equipment will operate to the user’s satis-
faction.
Users should ensure for their own protection that the
electrical ground connections of the power utility, tele-
phone lines and internal metallic water pipe system, if
present, are connected together. This precaution may be
particularly important in rural areas.
Before installing this equipment, users should ensure
that it is permissible to be connected to the facilities of
the local telecommunications company. The equipment
must also be installed using an acceptable method of
connection. In some cases, the company’s inside wiring
associated with a single line individual service may be
extended by means of a certified connector assembly
(telephone extension cord). The customer should be
aware that compliance with the above conditions may not
prevent degradation of service in some situations.
• Users should not attempt to make such connections
themselves, but should contact the appropriate electric
inspection authority, or electrician, as appropriate.
The Load Number assigned to each terminal device
denotes the percentage of the total load to be connected
to a telephone loop which is used by the device, to
prevent overloading. The termination of a loop may
consist of any combination of devices subject only to the
requirement that the total of the Load Numbers of all the
devices does not exceed 100.
Warranty, Regulatory Information, and Specifications
18
|
IC Radio Interference Statements
120-Volt Models
European Union Council of the European
Communities Statements for 230/240-Volt
Models
This OKI apparatus complies with Class B limits for radio
interference as specified in the Industry Canada Radio
Interference Regulations.
Electromagnetic Conformance Statement
This product complies with the requirements of the
Council Directive 89/336/EEC on the approximation of
the laws of the member states relating to electromag-
netic compatibility.
230/240-Volt Models
This OKI apparatus complies with the Class A limits for
radio interference as specified in the Industry Canada
Radio Interference Regulations.
Safety Conformance Statement
This product is in conformity with Directive 73/23/EEC on
the harmonization of the laws of Member States relating
to electrical equipment designed for use within certain
voltage limits.
Warranty, Regulatory Information, and Specifications
19
|
Material Safety Data Sheet
Overview
Emergency First Aid Procedures
OKIOFFICE 87 Toner (Type 6),
P/N 52111701, MSDS #58331801
For more information, contact Oki Data at:
Toner swallowed (ingested)
Dilute by giving two glasses of water and induce vomit-
ing by administering Syrup of Ipecac (follow
manufacturer’s instructions). Seek medical attention.
NEVER give anything by mouth or attempt to induce
vomiting in a person who is unconscious.
2000 Bishops Gate Boulevard
Mount Laurel, NJ 08054-4620
Emergency Information:
call 1-800-OKI-DATA(1-800-654-3282)
Toner inhaled
Remove person to fresh air. Seek medical attention.
Toner gets in the eyes
Flush eyes with large quantities of cool water for 15
minutes, keeping the eyelids open with fingers. Seek
medical attention.
Note: Small amounts of toner on skin or clothing can
easily be removed with soap and cold water.
Hot water makes toner harder to remove.
Current as of 5/12/01
Warranty, Regulatory Information, and Specifications
20
|
Hazardous Ingredients
Physical Data
Styrene-Butyl Acrylate Copolymer (91% by weight)
Melting Point: 110°C (230°F)
CAS# 25767-47-9
Boiling Point: Not applicable
OSHA TWA 15 mg/m3 for total dust
ACGIH TLV 10 mg/m3 for total dust
Vapor Pressure: Not applicable
Vapor Density (Air=1): Not applicable
Evaporation Rate (Butyl Acetate=1): Not applicable
Specific Gravity (H2O=1): 1.15
Solubility in water: Negligible
Carbon Black (5-7% by weight)
CAS# 1333-86-4
OSHA TWA 3.5 mg/m3
ACGIH TLV 3.5 mg/m3
Appearance and odor: Black granules, no odor
Polypropylene (less than 3% by weight)
CAS# 9003-07-0
OSHA TWA 15 mg/m3 for total dust
ACGIH TLV 10 mg/m3 for total dust
Amorphous Fumed Silica (less than 1% by weight)
CAS# 67762-90-7
OSHA PEL 15.0 mg/m3 for total dust
ACGIH TLV 10.0 mg/m3 for total dust
Note: This product is not regulated under Section 313
of SARA, Title III.
Warranty, Regulatory Information, and Specifications
21
|
2 Carbon black
Fire and Explosion Hazard Data
Flash Point (Method Used): Not applicable
Flammable Limits
(Group 2B “Possible Carcinogen”; IARC)
Overexposure to carbon black is associated with
causing irritation, conjunctivitis, and corneal hypo-
plasia of the eyes; minor irritation and eczema of
the skin; and irritation and bronchitis. Long-term
inhalation exposure may be associated with caus-
ing lung cancer.
Lower Explosive Limit: Not applicable
Upper Explosive Limit: Not applicable
Extinguishing Media: Water, CO2, Dry Chemical, or
Foam
Special Fire Fighting Procedures: Do not use methods
that may create a dust cloud, such as high pressure
water and/or steam
3 Polypropylene
(Group 3 “Not Classifiable”; IARC)
Subcutaneous implantation of polypropylene
powder in rats has induced tumors at the site of
implantation.
Unusual Fire and Explosion Hazards:
– Organic components decompose at 200-455°C (392-
851°F).
4 Amorphous Fumed Silica
– Material may explosively combust when finely
suspended in air.
(Group 3 “Not Classifiable”; IARC)
Overexposure to amorphous silica has been asso-
ciated with causing irritation of the lungs and
pneumoconiosis. Long-term inhalation exposure
may be associated with producing tumors in labora-
tory animals.
– Thermal decomposition of organic components may
result in release of oxides of carbon and nitrogen.
Health Hazards Data
Routes of Entry: Inhalation, Ingestion, Eyes, Skin.
1 Styrene-Butyl Acrylate Copolymer
Subcutaneous implantation of polymeric styrene
powder in rats has induced tumors at the site of
implantation.
Warranty, Regulatory Information, and Specifications
22
|
Reactivity Data
Spill Cleanup and Disposal
Spill Cleanup
Stability: Stable
Polymerization: Will not occur.
Small Spills
Hazardous Decomposition Products: Thermal decom-
position may result in release of oxides of carbon and
nitrogen.
1 Remove sources of ignition.
2 Clean up spill with wet cloth.
Large Spills
Temperature: Do not expose to temperatures above
200°C (392°F).
1 Remove sources of ignition.
2 Wear protective gear: respirator, rubber gloves,
Incompatibility: Avoid exposure to strong oxidizers.
goggles (see below)
3 Clean up spill with scoop, being careful not to
generate a lot of dust.
Waste Disposal
Follow appropriate federal, state and local regulations.
Warranty, Regulatory Information, and Specifications
23
|
Safe Handling and Use
To the best of the manufacturer’s knowledge, the
information contained herein is accurate. However,
neither the manufacturer, nor any of its affiliates,
make any representations or warranties (expressed or
implied), nor assumes any liability (including liability
for any direct, incidental, consequential, or other
damages) with respect to the accuracy or complete-
ness of the information contained herein. Such infor-
mation may be (without limitation) invalid if the speci-
fied material is used in combination with another, in a
particular process, or under unusual conditions.
Determination of suitability of any material for any
given purpose is the sole responsibility of the user
who assumes all risk and responsibility therefor. All
materials may present unknown hazards and should
be used with appropriate caution. The manufacturer
cannot and does not guarantee that the hazards
described herein are the only ones that exist.
Respiratory Protection: Not normally required. For large
spills, use NIOSH-approved full face-piece respirator
with HEPAcartridge during cleanup.
Protective Gloves and/or Eye Protection: Not normally
required. For large spills, use rubber gloves and chemi-
cal worker’s goggles during cleanup.
Ventilation: Outside of normal ventilation, not normally
required.
Other Protective Equipment and/or Hygienic Prac-
tices: None
Special Precautions
Precautions for Handling or Storage: Protect from high
heat. Avoid making dust.
Other Precautions: None
Warranty, Regulatory Information, and Specifications
24
|
|