2Wire AU2700 User Manual

OLYMPUS

DIAGNOSTIC SYSTEMS GROUP

AU2700 & AU5400

ON-LINE SPECIFICATIONS

- 1 -

Table of contents

page

1. Outline..............................................................................................................................................................................................4

2. Basic Specification...........................................................................................................................................................................5

2.1

2.2

2.3

Format of Transmission....................................................................................................................................................5

Transmission code............................................................................................................................................................5

Text format.......................................................................................................................................................................6

3.Transmission Text Format.................................................................................................................................................................9

3.1

3.2

3.3

3.4

3.5

3.6

Common and changeable item..........................................................................................................................................9

T.R.I. inquiry text .............................................................................................................................................................9

T.R.I. text .......................................................................................................................................................................11

Test result transmission text ...........................................................................................................................................12

Relation between real-time/batch and Transmission text................................................................................................21

Others .............................................................................................................................................................................22

4. Transmission Protocols ..................................................................................................................................................................30

4.1

4.2

4.3

Protocols at AU2700/5400 .............................................................................................................................................30

Timing/time-out..............................................................................................................................................................33

Rule of class B................................................................................................................................................................35

5.Application Protocol .......................................................................................................................................................................37

5.1

5.2

5.3

Receiving T.R.I. .............................................................................................................................................................37

Sending test result protocol ............................................................................................................................................40

Others .............................................................................................................................................................................42

6. Specification of Connection ...........................................................................................................................................................43

6.1

6.2

6.3

6.4

In/Output signals and Terminals.....................................................................................................................................43

Signal Level....................................................................................................................................................................43

Applicable Connector.....................................................................................................................................................43

others ..............................................................................................................................................................................43

A. Appendix…………………………………………………………………………………………………………………..44

1. Flags list ...............................................................................................................................................................................44

2. Online parameters list...........................................................................................................................................................46

3. Character table......................................................................................................................................................................49

4. Online parameter sheet ........................................................................................................................................................50

5. Online alarm list ...................................................................................................................................................................52

- 3 -

1. Outline

1) The following data is exchanged between the AU2700/5400 and the host computer system.

(1) Test Requisition Information (T.R.I.)

(2) Test Results

2) The data transmission is conducted in either of the following mode:

(1) Class A Transmission is without synchronizing with analysis. This mode does not utilize the ACK/NAK protocol.

(2) Class B Transmission is synchronizing with analysis. This mode does utilize the ACK/NAK protocol.

3) The Following format and protocol can be selected by [PARAMETER] [ONLINE] menu.

(1) Setup

(2) Communication protocol

A. T.R.I. Inquiry Text Format

B. Test Result Text Format

(3) Test Number Assignment

2. Basic Specification

- 4 -

(2.1) Format of Transmission

Item

Contents

RS-232C

Transmission

line

Synchronization

Half-Duplex

Data transmission

mode

Bit/sec

4800bps, 9600bps

Configuration

start bit

data bit

parity bit

stop bit

total

1 bit

7 or 8 bit

none, odd or even

1 or 2 bit

9-12 bit

These can be selected by [PARAMETER] [ONLINE] [PROTOCOL]

menu.

Form of

Transmission

Class A Transmission are conducted from the sender to

the receiver in a certain time of interval.

Class B Transmission are conducted by confirming with ACK

(receipt acknowledged)or NAK (not acknowledged)

between the sender and the receiver.

1 channel

Use channel

Retry

Class A: None

Class B: 0-3 This can be selected by [PARAMETER] [ONLINE]

[PROTOCOL]menu.

(2.2) Transmission code

Item

Contents

Limit of value

20H-7EH

Data code

7 bit code ASCII CODE

8 bit code

These can be

selected by

[PARAMETER]

[ONLINE]

[PROTOCOL]

menu.

1 byte code

20H-7EH

A1H-DFH

Control code

Start code/terminate code

01H-1FH

06H

15H

ACK

NAK

BCC

00H-FFH

- 5 -

(2.3) Text format

(1) Basic configuration as follows:

1) 2) 3) 4)

5) 6)

Name

Digit

Contents

Remarks

1) Text start code

2) Text

1,2

01h-1Fh

Data start code

Normally 02h

AU2700/5400

→ Host

T.R.I. inquiry

Classification

R_ *

Start of T.R.I. inquiry

T.R.I. inquiry of

normal sample

T.R.I. inquiry of

rerun sample

End of T.R.I. inquiry

T.R.I.

Host

S_ *

T.R.I. of normal sample

T.R.I. of rerun sample

Stop of T.R.I. inquiry

Test result

→ AU2700/5400

AU2700/5400

Start of transfer result

Normal sample result

Rerun sample result

Reagent blank sample

Result

→ Host

D_ *

Calibration result

d_ *

Stat fast result(AU2700 Only)

Emergency fast result

(AU5400 Only)

Stat fast rerun result

(AU2700 Only)

Emergency fast rerun result

(AU5400 Only)

QC sample result

End of result transfer

3) Unit No.

0,2

[PARAMETER]

[ONLINE] [PROTOCOL]

menu.

(Optional)

4) Text code

Contents of Text

Data No. is added behind

text of Header parts.

[PARAMETER]

[ONLINE] [PROTOCOL]

menu.

5) text end code

1,2

01h-1Fh

00h-FFh

End of text code

[PARAMETER]

[ONLINE] [PROTOCOL]

menu.

6) BCC

The sum with the Exclusive

or logic between 2-5 and including

[PARAMETER]

[ONLINE] [PROTOCOL]

menu.

(Block Check

Character)

(Optional)

remarks * _ is space.

- 6 -

(2) Blocking

A. Definition of Term

1) 2) 3)

5) 6)

Term

Definition

Is the total number of bytes from 1) to 6).

Text length

[PARAMETER]

[ONLINE]

[PROTOCOL] menu.

Max block

length

It is the Max length of text in one record.

The length of block can be selected in online parameter menu.

(256, 512, 1024)

[PARAMETER]

[ONLINE]

[PROTOCOL] menu.

- 7 -

B. Kind of text and blocking

Kind of text

Kind

Method of Blocking

Non-blocking

Fixed length

Text

•

Start of T.R.I. inquiry

T.R.I. inquiry text

End of T.R.I.

transmission text.

Stop of T.R.I. inquiry

Start of transfer result

transmission text.

End of result transfer

transmission text.

•

Variable

length text

Using

blocking

Max block length

< text length

•

T.R.I. text

Rerun T.R.I. text

Test result text

Block

Identification

No.

first block

Block

Identification No. =0

second block

•

Rerun result text

QC result text

Acal result text

Reagent blank result

text

(0-9,E)

Block

Identification No. =1

•

STAT(fast) result text

(AU2700 only)

Emergency(fast) result

text

(see page 9)

•

(AU5400 only)

•

last block

Block

Identification No. =E

Text end

code

Text end code = ETX(03H)

and using ETB = yes *1

End of block = ETB

End of text = ETX

Text end code <>ETX(03H)

or ETB(17h)is no-use *1

End of block is

designated in menu.

End of text is

designated in menu.

Using ETB can be selected

in online parameters.

Remark *1:When Block Identification No. is numeric(0,1,....), Only “End of Block” is used.

When Block Identification No. is “E”, Only “End of Text” is used.

- 8 -

3. Transmission Text Format

(3.1) Common and changeable item

The following can be selected by [PARAMETER] [ONLINE] [PROTOCOL] menu.

Text start code 1)

Unit No. 3)

Common Item

Text end code

BCC

Sample Type

Dummy(in Test Result transmission Text)

Block Identification No.

Rack No./Cup Position

Unit No. on the T.R.I. text (with out Rerun)

ANL unit No. and Cuvette side on Test Result transmission Text (without RB,ACAL,QC)

Space Code before the Text Classification (S,R,D text)

Reagent Lot No. and bottle No.

The order of the Sample number and Sample ID on the text can be changed, the sample type, the Dummy spaces and

the Block Identification Number can be changed in the [PARAMETER] [ONLINE] [PROTOCOL] menu. There is a

function at the bottom of the page called “Special”. These features may be altered under the “Special” menu.

Making changes in the “Special” menu only affects the T.R.I. Text and Test Result Transmission Text.

(3.2) T.R.I. inquiry text

(1) Start text to inquiry test requisition.

1) R B 3) 5) 6)

(2) Normal run inquiry test requisition.

Cup

1) R

3) Rack no.

Posi-

tion

Sample no.

Sample ID

5) 6)

Sample type

- 9 -

(3) Repeat run inquiry test requisition.

Cup

1) R H 3) Rack No.

Posi-

tion

Sample no.

Sample ID

5) 6)

Sample type

(4) End text to inquiry test requisition.

1) R E 3) 5) 6)

- 10 -

(3.3) T.R.I. text

(1) Normal sample test requisition information text.

cup

1) S _

Rack No.

posi-

tion

Sample no.

Sample ID

Dummy

Sample type

Block Identification No.

Patient

age

month

Information 1

Information 2

Information 3

Patient

Information 4

Patient

Information 5

Patient

Information 6

Test Test Test Test Test Test Test

code code code code code code code

Test

code 5) 6)

(2) Repeat run sample test requisition information text.

Cup

Original

1) S H Rack no.

Posi-

tion

Sample no.

Sample ID

Sample no.

Sample type

Block Identification No.

Blocking

Test Me Test Me Test Me Test Me

code th code th code th code th

Test Me

code th 5) 6)

- 11 -

(3) End of T.R.I. Text transmission.

1) S E 5) 6)

(3.4) Test result transmission text

(1) Start of test result transmission text.

1) D B 3) 5) 6)

- 12 -

(2) Normal sample test result text.

Cup

1) D

3) Rack no.

Posi-

tion

Sample no.

Sample ID

Dummy

Sample type

Block Identification No.

Patient

Information 1

Patient

Information 2

Patient

Information 3

Age

Month

Patient

Information 4

Information 5

Information 6

Blocking

Test

R1 Bottle

R1 Lot No. No.

R2 Bottle

R2 Lot No. No.

code

Cuvette side

ANL unit No.

Blocking

Flags

　Test Result

5) 6)

- 13 -

(3) Stat(fast) test result text (AU2700 only).

Cup

P n n n

_ 3) Rack no.

Posi-

tion

Sample no.

Sample ID

Dummy

1-22

Sample type

Block Identification No.

Patient

Information 1

Patient

Information 2

Patient

Information 3

Age

Month

Patient

Information 4

Information 5

Information 6

Blocking

R1 Bottle

R1 Lot No. No.

R2 Bottle

R2 Lot No. No.

Test

code

Cuvette side

ANL unit No.

Blocking

Flags

　Test Result

5) 6)

- 14 -

(4) Emergency(fast) test result text (AU2700 only).

Cup

Posi-

tion

E n n n

Sample no.

1) d _ 3) Rack no.

Sample ID

Dummy

1-22

Sample type

Block Identification No.

Patient

Information 1

Patient

Information 2

Patient

Information 3

Age

Month

Patient

Information 4

Information 5

Information 6

Blocking

R1 Bottle

R1 Lot No. No.

R2 Bottle

R2 Lot No. No.

Test

code

Cuvette side

ANL unit No.

Blocking

Flags

　Test result

5) 6)

- 15 -

(5) Repeat run result text -1 .

1) D H 3) Rack no.

Cup

Posi-

tion

Original

Sample no.

Sample ID

Sample type

Block Identification No.

Blocking

Test

R1 Bottle

R1 Lot No. No.

R2 Bottle

R2 Lot No. No.

code

Cuvette side

ANL unit No.

Blocking

Flags

　Test result

5) 6)

- 16 -

(6) Repeat run result text -2 Stat fast sample (AU2700 Only) .

Cup

Posi-

tion

P n n n

Sample no.

Original

Sample No.

1) d H 3) Rack no.

_ _ _ _

Sample ID

1-22

Sample type

Block Identification No.

Blocking

Test

R1 Bottle

R1 Lot No. No.

R2 Bottle

R2 Lot No. No.

code

Cuvette side

ANL unit No.

Blocking

Flags

　Test result

5) 6)

- 17 -

(7) Reagent blank result text.

Dummy

_ _

1) D R 3)

_ _

Sample no.

Sample type

This dummy is same ID digits

and assigned area is decided associated

with the rack No.

Block Identification No.

ANL unit No.

Cuvette side

Test

code

R1 Lot No.

R1 Bottle No.

R2 Lot No.

R2 Bottle No.

1:First data

2:Second data

Test Result

Flags

5) 6)

- 18 -

(8) Acal (Calibration) result text.

Dum

1) D A 3)

_ _

Sample no.

Calibrator ID

_ _

This dummy spaces is assigned in case rack No. exists

and assigned area is decided associated with the rack No.

Calibrator No. (1-80)

Block Identification No.

ANL unit No.

Cuvette side

Blocking

R1 Bottle

R1 Lot No. No.

R2 Bottle

R2 Lot No. No.

Test

Code

Blocking

Flags

　Test result

5) 6)

- 19 -

(9) QC (Quality Control) result text.

Dum

1) D Q 3)

Sample no.

Control ID

This dummy No. is assigned in case rack No. exists

Control No.

and assigned area is decided associated with the rack No.

Block Identification No.

ANL unit No.

Cuvette side

Blocking

R1 Bottle

R1 Lot No. No.

R2 Bottle

R2 Lot No. No.

Test

code

Blocking

Flags

　Test result

5) 6)

(10)End of test result transfer text.

1) D E 3) 5) 6)

- 20 -

(3.5) Relation between real-time/batch and Transmission text

•

T.R.I. inquiry of Routine, Emergency, Stat and Repeat run can be selected as real-time or batch.

Test results of all samples can be selected as real-time or batch.

- 21 -

(3.6) Others

(1) Contents and formats of text.

Item

Digit

Contents

Remarks

1. Rack No.

4 or 5

'0001'-'9999' or

'00001'-'99999'

STAT sample is space

•

The digit of rack no.

and cup pos. and

these using is

changeable in

[PARAMETER]

[ONLINE]

[PROTOCOL]

menu.

(Optional)

When Rack no. is no setting,

Rack No. is '00000'.

•

In case ,receive

T.R.I.

in batch.

2. Cup position

(Optional)

rack : '01'-'10'

STAT : '01'-'22'

This is automatically

assigned when rack

No. is in use.

3. Sample type

4. Sample No.

space : serum

U : urine

X : other

'0001'-'9999' : Routine sample

'E001'-'E999' : Emergency sample

'P001'-'P999' : Stat sample

'R001'-'R999' : Reagent blank

'A001'-'A999' : Calibration sample

'Q001'-'Q999' : QC sample

5. Sample ID

4-26

Number or character

•

Number of digits can

be changed in the

[PARAMETER]

[FORMAT]

[FORMAT

REQUISITION]

menu.

6. Original

Sample No.

'0001'-'9999' : normal sample

'E001'-'E999' : emergency sample

'P001'-'P999' : stat sample

For Repeat Run Results.

7. Reserved

Space

8. Block

Identification

No.

'0'-'9' Last text is 'E'

- 22 -

9.ANL unit No.

‘1’: AU5400 ISE

‘1’: AU5400 unit 1

‘2’: AU5400 unit 2

‘3’: AU5400 unit 3

ANL unit No. is added to the

header portion of RB, ACAL,

and QC result data. Normal

sample and rerun sample, it is

added to each item. However,

in the case of an calculate

item, a space is added. In a

normal sample and repeat run,

it can be prevented from

adding a unit number by the

setup of an on-line condition

menu. This option can be

selected in the

(Optional)

‘1’: AU2700

[PARAMETER][ONLINE]

[PROTOCOL][SPECIAL]

menu.

10.Cuvette side

AU5400

Cuvette side is added to the

header portion of RB, ACAL,

and QC result data. Normal

sample and rerun sample, it is

added to each item. However,

in the case of an calculate

item, a space is added. In a

normal sample and rerun, it

can be prevented from adding

a unit number by the setup of

an on-line condition menu.

This option can be selected in

the

‘0’ : inner cuvette (ISE Cell 1)

‘1’ : outer cuvette (ISE Cell 2)

AU2700

‘0’ : inner cuvette(ISE)

‘1’ : outer cuvette

(Optional)

[PARAMETER][ONLINE]

[PROTOCOL][SPECIAL]

menu.

11. Sex

M : male

•

These items can be

selected/canceled in

the [PARAMETER]

[FORMAT]

F : female

SP : none sex

0 : no-set

(Optional)

[FORMAT

REQUISITION]

menu.

12. Age

'000'-'150'

space : no-set

(Optional)

13. Month

(Optional)

14. Patient

Information

(Optional)

15. Online

Test No.

'00'-'11'

space : no-set

number or character

'01'-'99'

•

This number can be

changed in the

[PARAMETER]

[ONLINE] [TEST

NO.]

16. Method

'0':normal

For Repeat Run Results.

'1':dilution

‘2’:condense

- 23 -

17. Test result

8 or 11

Test Result digits can be 6 or 9.

Flags digits is 2.

•

0 suppress can be

selected/canceled in

online parameter

Number of digits can

be changed to

6 or 9 in

Refer to Appendix 1 (Flags List)

online parameter

menu.

18. Lot No. and

Bottle No.

4*4

Number or character

•

This option can be

selected in the

(Optional)

[PARAMETER]

[ONLINE]

[PROTOCOL]

[SPECIAL] menu.

Remark *1:　If only age is the space in the text from a host, AU2700/AU5400 will output an error. The combination of Age

and Month is as follows.

Host -> AU2700/5400

Pattern

Age

Month

Spaces

Result

Error

Spaces

XXX

Spaces

XXX

- 24 -

(2) Test result format.

A. Test result

Data digit is 6 and 0 suppress is not used.

•

1 2

•

Data digit is 9 and 0 suppress is not used.

4 5

Data digit is 6 and 0 suppress is used.

2 3

Data digit is 9 and 0 suppress is used.

2 3

- 25 -

B. LIH result

•

Data digit is 6 and 0 suppress is not used.

ICT HEM

LIP

0 NORMAL

1 +

FLAG

2 ++

3 +++

4 ++++

5 +++++

6 ABN

9 Test not performed.

•

Data digit is 9 and 0 suppress is not used.

LIP

ICT

HEM

0 0

0 NORMAL

1 +

FLAG

2 ++

3 +++

4 ++++

5 +++++

6 ABN

9 Test not performed.

- 26 -

•

Data digit is 6 and 0 suppress is used.

ICT HEM

LIP

0 NORMAL

1 +

FLAG

2 ++

3 +++

4 ++++

5 +++++

6 ABN

9 Test not performed.

•

Data digit is 6 and 0 suppress is used.

LIP

ICT

HEM

_ _

0 NORMAL

1 +

FLAG

2 ++

3 +++

4 ++++

5 +++++

6 ABN

9 Test not performed.

- 27 -

(3) T.R.I. of calculated tests.

Note: Calculated Test No. in T.R.I. from Host is ignored. The tests that create the calculated tests

can only be ordered from the Host.

(4) Data format that Test result data is digit over.

a. Data digit is 6.

9 9

• Data digit is 9.

(5) Data format that Test result data is OD-value.

• Data digit is 6.

1 2

When the data is negative OD-value, it is same as digit over.

• Data digit is 9.

- 28 -

(6) T.R.I of LIH.

In any case, LIH test no. in T.R.I from Host is necessary for LIH analysis.

LIH Reagent Test Name

LIH

LIH Measure

All

Even if AU2700/AU5400 does not have the request from

a host, it performs LIH analysis.

Select

All

AU2700/AU5400 performs LIH analysis according to the

request from a host.

Even if AU2700/AU5400 does not have the request from

a host, it performs LIH analysis.

Other

LIH analysis is not performed even if AU2700/AU5400

has the request from a host.

Note 1) These can be selected by the following menus.

LIH Reagent Test Name : [PARAMETER] – [COMMON TEST PARAMETERS] – [TEST NAME]

LIH Measure

: [PARAMETER] – [COMMON TEST PARAMETERS] – [ROUND]

- 29 -

4. Transmission Protocols

(4.1) Protocols at AU2700/5400

(1) Class A: without ACK/NAK exchange.

A. Sending

Text to be sent:

T.R.I. Inquiry text

Repeat Run T.R.I. Inquiry text

Start of Test Result Transmission text

Test Result text

Repeat Run Result text

End of Test Result Transmission text

Start

Text

Block end (BCC)

Text end (BCC)

Initial

Condition

Transmission text

B. Receiving

Text to be received:

T.R.I. text

Repeat Run T.R.I. text

End of T.R.I. Transmission text

Start

Text

Block end (BCC)

Text end (BCC)

Initial

Condition

Transmission text

- 30 -

(2) Class B: with ACK/NAK protocol.

A. Sending

Text to be sent:

T.R.I. Inquiry text

Repeat Run T.R.I. Inquiry text

Start of Test Result Transmission text

Test Result text

Repeat Run Result text

End of Test Result Transmission text

ACK

Received

Block end (BCC)

Initial

Condition

Start

Transmission text

Text

Text end (BCC)

NAK

Received

NAK

Received

1^sttime: resending the same block

2^ndtime: sending the next block

Time-out

1^sttime: resending the same text

2^ndtime: return to initial condition

- 31 -

B. Receiving

Test to be sent:

T.R.I. text

Repeat Run T.R.I. text

End of T.R.I. Transmission text

ACK

Send

ACK

Send

Block end (BCC)

Initial

Condition

Start

Transmission text

Text

Text end (BCC)

NAK

Send

NAK

Send

1^sttime: receiving the same block

2^ndtime: receiving the next block

1^sttime: receiving the same text

2^ndtime: return to initial condition

- 32 -

(4.2) Timing/time-out

(1) Time-out/timing list .

Kind

Description

Default

2 s

Remarks

Limit time from end of transfer/receive to start

of text receive.

Limit time from start of text receive to end of

text receive.

Limit time from start of text transfer to end of

text transfer.

Limit time from end of text transfer to response of

receive.

Interval time of transmission

Min. time from receive

Limit time from NAK response to start receive

of retry text.

0.1 x n sec

(Note 2)

(Note 1)

n=1-99

2 s

1 s

2 s

Min. time from end of transfer text to receivable

text.

Min. time from end of transfer text to next receivable

text.

Min. time from end of transfer text to receivable

Response.

Min. time from end of receiving text to transfer

Response.

0.5 s

Not Changeable

0.5 s

note 1) ((Max text length x Character length)/Bit/sec)+ 0.5 s

note 2) These time-outs can be changed in the online parameters menu.

(2) Rule of class A

A. Case 1

AU2700/5400

Host

<T3

<T2

<T3

t1<<T1

T5<

B. Case 2

AU2700/5400

Host

<T3

T5<

- 33 -

C. Case 3

AU2700/5400

Host

<T2

t2<<T1

- 34 -

(4.3) Rule of class B

(1) Case 1

AU2700/5400

Host

<T3

<T2

<T3

t3<<T4 t1<<T1

t4<

T5<

(2) Case 2

AU2700/5400

Host

<T3

t3<<T4

T5<

(3) Case 3

AU2700/5400

Host

<T2

t4<

t2<<T1

(4) Case 4 (Abnormal Case 1)

AU2700/5400

Host

<T3

t3<<T4

T6<

t3<<T4

T5<

- 35 -

(5) Case 5 (Abnormal Case 2)

AU2700/5400

Host

<T3

<T2

t3<<T4

T6<

t3<<T4

t1<

(6) Case 6 (Abnormal Case 3)

AU2700/5400

Host

<T2

t4<

t2<<T7

t4<

t1<<T1

(7) Case 7 (Abnormal Case 4)

AU2700/5400

Host

<T2

<T3

t4<

t2<<T7

t4<

T5<

- 36 -

5. Application Protocol

(5.1) Receiving T.R.I.

(1) Trans./receive sequence in one session.

General sequence :

A. Example 1

Shift next Rx-transfer when Online Error occurred.

AU2700/5400

Host

･･･

In case 2 blocks

B. Example 2

Stop the session when Online Error occurred.

RB Rx Rx

AU2700/5400

Host

･･･

(2) Detail

T.R.I.

Receive Kind of text

Timing/condition

Real-time RB(request

Start)

This text is transferred when it is shifted from stand-by

mode to start measure and then the first Rx is transmitted.

R_ * (request

normal)

(Note 2)

Request of

sample no.

Request of

sample id

RH (request

rerun)

When detecting cup, this Sample No. is transferred if this

sample has not T.R.I..

When reading ID is normally, this Sample ID is transferred

if this sample has not T.R.I..

(Note 2)

Request of

sample no.

Request of

sample ID

When detecting cup, this Sample No. is always transmitted

When reading ID is normally, this Sample ID is always

transmitted.

remarks * _ is space.

Note 1) The number of times a T.R.I. inquiry can be sent when an online error is generated can be selected in

[PARAMETER] [ONLINE] [PROTOCOL].

Note 2) It is possible that the R_-text and RH-text are mixed in one session.

- 37 -

Receive

Kind of text

Timing/condition

This text can be received after end of Rx-transfer within

the designated time.

Real-time Sx

RE (request

This text is transferred when shifting to the modes below.

1) measure mode to standby mode

end)

2) measure mode to stop mode

This text is transmitted when the communication is

canceled by the online alarm.

Batch

RB (request

start)

This text is transmitted when receiving T.R.I. is sent in the test

requisition.

R_ * (request

Normal)

(Note 3)

Request of

sample no.

This text is transmitted at the designated time intervals.

The texts are the samples that are selected in the test

requisition menu.

RH (request rerun)

(Note 3)

Request of

sample no.

This text is transmitted at the designated time intervals.

The texts are the samples that are selected in the test

requisition menu.

This text can be received after end of Rx-transfer within

the designated time.

RE (request end)

This text is transmitted when it was receiving the last sample No.

in test requisition menu and SE text isn't received.

This text is transmitted when the communication is

canceled in the test requisition menu.

This text is transmitted when the communication is

canceled by the online alarm.

remarks * _ is space.

Note 3) R_-text and RH-text is transferred in separate sessions.

- 38 -

(3) Kind of T.R.I. transfer/receive.

A. T.R.I. of normal sample

Setting of parameters

Method of T.R.I. inquiry & T.R.I.

Receive T.R.I.. inquiry

Method of

Kind of T.R.I.

T.R.I. inquiry

Sample no

T.R.I.

Real-time

Sequential

Rack no.

Request

of sample no

Sample no *1

Sample no

(Calculated rack

No. and cup pos.

No.)

Sample ID

Request

of sample ID

Request

Sample ID

Sample no *1

Sample no.

Sample ID *1

Sample no *1

Batch

Sequential

Rack no.

of sample no

Sample ID

Sample ID *1

Sample no *1

• Selectable setting of receiving T.R.I. in online parameter menu and requisition format menu.

• Selectable method of T.R.I. in system menu.

Remark *1: Sample no. and Sample ID of T.R.I. must be same to the Sample no. and Sample ID of T.R.I inquiry.

(4) T.R.I. of Repeat sample

Setting of parameters

Repeat sample

Receive of T.R.I. Repeat rack

Method of T.R.I. inquiry & T.R.I.

Method of

T.R.I. inquiry

Kind of T.R.I.

T.R.I. inquiry

T.R.I.

Real-time

Using

Sequential

rack no.

Request

of Sample no.

Original

sample no. *1

Repeat sample no.

Repeat sample no.*1

Sample ID *1

Sample ID

Request

Sample ID

of sample ID

Repeat sample no.

Repeat sample no.*1

Batch

Sequential

rack no.

Request

of sample no.

Repeat sample no.

Original

sample no. *1

Sample ID

Sample ID *1

Remark *1: Repeat sample no. and sample ID of T.R.I. must be same as the Repeat sample no. and sample ID of T.R.I

inquiry.

- 39 -

(5.2) Sending test result protocol

(1) Transfer sequence for one session.

General sequence :

A. Example 1

Shift next Dx-transfer when Online Error occurred.

DB Dx Dx Dx Dx

AU2700/5400

Host

2 blocks

B. Example 2

Stop session when Online Error occurred.

AU2700/5400

Host

(2) Detail

Data

Trans. Kind of text

Timing/condition

Normal end

Online error

Real

-time

DB (START)

This text is transmitted when

it is shifted from stand-by

mode to measure mode and just

It is shifting the

transfer of the

test results.

It is output the

alarm and it is

executed the below

behind the first Dx is transmitted.

• Error protocol is

stop.

It is canceled the

transfer of Dx/DE

• Error protocol is

continue

Dx (result data) It is transmitted one by one

the samples that are finished

measuring.

It is shifting next

The transfer of

Dx/DE.

It is shifting next

the transfer of

Dx/DE.

DE (end)

This text is transmitted after

the last transfer of Dx text

and the below shifting mode.

It is ended the

session of transfer of alarm and ended

The text of test

results.

It is output the

the session of the

transfer of the

1) measure mode to standby

2) measure mode to stop

This text is transmitted when

the communication is canceled

by the online alarm.

text of test results.

- 40 -

Data

Trans.

Kind of text

DB (start)

Timing/condition

Normal end

Online error

Batch

This text is transmitted when it

selected the start of transmission

in the online menu.

It is shifting the

transfer of the test

Results.

It is output the

alarm and it is

executed the below

• Error protocol is

stop.

It is canceled the

transfer of Dx/DE

• Error protocol is

continue.

This text is transmitted at

the designate time intervals.

The text are the samples that

is selected in the online menu

It is shifting next

The transfer of

Dx/DE.

(result data)

It is shifting next

the transfer of

Dx/DE.

DE (end)

This text is transmitted when

it was transmitting the

sample No. that is selected in

online menu and it was after

the designated time.

It is ended the

session of transfer

of the text of test

results.

It is output the

alarm and ended

The session of the

transfer of the

text of test results.

This text is transmitted when

the communication is canceled

in the online menu.

This text is transmitted when

the communication is canceled

by the online alarm.

Note 1) The number of times a TRI Inquiry can be sent when an online error is generated can be selected in the

[PARAMETER] [ONLINE] [PROTOCOL] menu.

- 41 -

(5.3) Others

(1) Mixing the session of the TRT inquiry and the session of the test results.

A. General sequence

AU2700/5400

Host

･･･

(a)

(b)

(2) Detail

Section

(a)

Definition of section

Limitation

The start of the transmission of the text

of T.R.I. inquiry

Don't transmit the Test result text.

-- The end of the receiving of all T.R.I.

for one samples

(b)

The start of the transmission of the text

of the test results

Don't transmit the T.R.I. text.

-- The end of the receiving of all result

for one samples

- 42 -

6. Specification of Connection

(6.1) In/Output signals and Terminals

PC Terminal

at AU2700/5400

Terminal

at host

Signal Name

Abbrv.

Direction

computer

(25 Pin Configuration)

-------------------------------------------------------------------------------------------------------------------

Ground

Data sent

Data receive

Signal Ground

TxDATA

RxDATA

3 (Rx DATA)

2 (Tx DATA)

(SG)

Request to send RTS

Clear to send CTS

Caution: RTS and CTS must be connected directly.

(6.2) Signal Level

Signal/Signal Format

Signal Level

------------------------------------------------------------------------------------

SPACE (ON)

MARK (OFF)

+3V and higher ("H")

-3V and lower ("L")

Note: "H" stands for "HIGH LEVEL" and "L" for "LOW LEVEL".

(6.3) Applicable Connector

Style of connector : Confirm the standard of IBM PC (RS232 DB9 Male)

Provide a RS232 DB9 Female connector.

Style of connector Cover : ditto

(6.4) Others

A. When powering ON or OFF the host computer system, ensure that the AU2700/5400 is in

Standy mode. Powering ON or OFF the host computer system while the AU2700/5400 is being operated may

result in abnormality function of the AU2700/5400.

B. The cable for host communication is not included in the AU2700/5400 standard accessories.

A shielded cable must be used for host connection.

C. Do not use the terminals on the AU2700/5400 other than No. 2,3,5,7, or 8 for any purpose.

- 43 -

A. Appendix

(1) Flags list

Flag

Contents

(

Failed to evade the contamination since the detergent for evading the contamination is not enough.

The sample probe is clogged with sample.

Calculation unable due to abnormal photometric data

Sample level detection error

Reagent level detection error

Calculation unable due to abnormal data

Reagent absorbance value at P-START of Reagent Blank run, is smaller than the

Lower limit of the Parameter.

Reagent absorbance value at P-START is lower than the lower limit specified

In the Parameters in routine run.

Reagent absorbance value at P-END of Reagent Blank run, is greater than the

Upper limit of the Parameter.

Reagent absorbance value at P-END is higher than the upper limit specified

In the Parameters in routine run.

Abnormally high result; absorbance of every wavelength is more than 2.5.

No linearity validation conducted because less than 3 data obtained in the

Kinetics.

Too quick reaction slope in increasing kinetics, absorbance at P-START is

Higher than MAX. OD in increasing FIXED assay, or too slow reaction slope

In decreasing kinetics (= no reaction observed)

Too quick reaction slope in increasing kinetics, or absorbance at P-END is

Lower than MIN. OD in increasing FIXED assay.

Linearity error in kinetics.

Prozone data error (prozone check point data error)

Prozone error

Result higher than the dynamic range specified in the Parameters

Result lower than the dynamic range specified in the Parameters

Other QC data error

QC result beyond the QC value range specified in the Parameters

Multi-rule QC data error

Result beyond the panic value specified in the Parameters

Abnormality found in the Inter-Item Check

Result higher than DECIDE RANGE designated in parameters.

Result lower than DECIDE RANGE designated in parameters.

Higher than the result value range specified in the Parameters

Lower than the result value range specified in the Parameters

Result higher than the repeat run range specified in the Parameters

Result lower than the repeat run range specified in the Parameters

Result extracted for repeat run

- 44 -

Test not performed: test has been requisitioned but not performed due

To any reason.

transferred data to host

)

edited data

correct data by manual correction

On-board stability over

Calibration stability over or Calibration does not exist.

Current reagent lot number was different from reagent lot No. when ACAL analysis

- 45 -

(2) Online parameters list

Transmission information

Contents

T.R.I. receive

Normal sample

Emergency sample

Stat sample

Real-time/batch/none

[PARAMETER] [ONLINE] [SETUP]

menu.

Normal Repeat sample

Emergency Repeat sample

Stat Repeat sample

Test result transfer

Normal sample

Real-time/batch/none

Real-time/none

Emergency sample

Stat sample

Stat Fast sample

Normal Repeat sample

Emergency Repeat sample

Stat Repeat sample

QC sample

Calibration sample

Reagent blank sample

Real-time/batch/none

Protocol 2

Contents

Error control

Receive

Continue/stop

[PARAMETER] [ONLINE]

[PROTOCOL] menu.

Transfer

Protocol –1

Contents

Data format

character length

parity bit

7/8

[PARAMETER] [ONLINE]

[PROTOCOL] menu.

ODD/EVEN/none

1/2

stop bit

Basic text format

start code 1

start code 2

end code 1

end code 2

Max text length

unit no.

00H-FFH

256/512/1024

00-99 space

use/none

[PARAMETER] [ONLINE]

[PROTOCOL] menu.

use ETB

Sequence control

bit/sec

protocol

BCC check

retry times

time out T1

4800/9600

class A/class B

use/none

(0-3)

Text Format

- 46 -

Text information

Contents

rack no. /cup position

rack no. digit

use/none

4/5

[PARAMETER] [ONLINE]

[PROTOCOL] menu.

Sex

age/month

use/none

[PARAMETER] [FORMAT]

[REQUISITION FORMAT]

menu.

patient information 1

patient information 2

patient information 3

patient information 4

patient information 5

patient information 6

sample ID digits

use/none digits

4-26 digits

[PARAMETER] [FORMAT]

[REQUISITION FORMAT]

menu.

[PARAMETER] [FORMAT]

[REQUISITION FORMAT]

menu.

data format

6 /9 digits

[PARAMETER] [ONLINE]

[PROTOCOL] menu.

data zero suppress

Sample Type

used/none

[PARAMETER] [ONLINE]

[PROTOCOL] menu.

used/none

[PARAMETER] [ONLINE]

[PROTOCOL] [SPECIAL] menu.

[PARAMETER] [ONLINE]

[PROTOCOL] [SPECIAL] menu.

[PARAMETER] [ONLINE]

[PROTOCOL] [SPECIAL] menu.

[PARAMETER] [ONLINE]

[PROTOCOL] [SPECIAL] menu.

[PARAMETER] [ONLINE]

[PROTOCOL] [SPECIAL] menu.

[PARAMETER] [ONLINE]

[PROTOCOL] [SPECIAL] menu.

[PARAMETER] [ONLINE]

[PROTOCOL] [SPECIAL] menu.

[PARAMETER] [ONLINE]

[PROTOCOL] [SPECIAL] menu.

Dummy

(Test Result Transmission Text)

Block Identification No.

used/none

ANL Unit No.

Cuvette Side

used/none Note 3

S.No. / S.ID

used/none

Sequence of S.No. and S.ID in

T.R.I text

Sequence of S.No. and S.ID in

Test result text

Lot No. and Bottle No.

Note 1)When you send the “Block Identification No.” field as none, the program will change the parameters automatically as

following.

End Code = ETX

ETB Control = used

Note 3) Only a Normal sample and repeat sample can be changed.

- 47 -

Each of the following parameters are influenced as shown below.

RB R_ RH RE S_ SH SE DB D_ d_ DH dH DR DA DQ DE

Sample Type

Dummy

○

(Test Result

Transmission Text)

Block Identification

No.

Sequence of S.No.

and S.ID in

T.R.I text

○

Sequence of S.No.

and S.ID in

Test result text

ANL Unit No.

Cuvette Side

Lot No. and Bottle

No.

○

: influenced

: not influenced

: not apply

- 48 -

(3) Character Table

HIGH

LOW

DE SP

{

SH D1

SX D2

EX D3

ET D4

EQ NK

AK SN

BL EB

BS CN

[

(

HT EM )

LF SB

;

CL FS

CR GS

SO RS

SI US

]

}

From 20H to 7EH: These characters can be used for the Sample ID code.

From 30H to 39H: These characters can be used for Test numbers.

A1 - DC is Japanese character set.

- 49 -

(4) AU2700/5400 Online Parameter Sheet

Set up

Setting

T.R.I. Receive

Routine Normal

ꢀreal time ꢀbatch ꢀnone

Routine Emergency

Routine Repeat

Emergency Repeat

Stat Normal

Stat Repeat

Results Transfer

Routine Normal

ꢀreal time ꢀbatch ꢀnone

Routine Emergency

Routine Repeat

Emergency Repeat

Stat Normal

Stat Repeat

ꢀreal time ꢀbatch ꢀnone

ꢀreal time ꢀnone

Stat Fast

Calibration

Reagent blank

ꢀreal time ꢀbatch ꢀnone

Setting

Upper protocol

Error control

T.R.I. Receive

Results Transfer

Lower protocol

Character format

Character length.

ꢀcontinue ꢀstop

Setting

ꢀ7 ꢀ8

Parity bit

Stop bit

Data format

Start code 1

Start code 2

End code 1

End code 2

Text length

Unit No.

ETB control

SEQ. Control

Bit/sec

ꢀodd ꢀeven ꢀnone

ꢀ1 ꢀ2

[ ] (01-1F)

[ ] (00-1F)

[ ] (01-1F)

[ ] (00-1F)

ꢀ256 ꢀ512 ꢀ1024

[ ] (00-99 space)

ꢀyes ꢀno

ꢀ4800 ꢀ9600

ꢀClass A ꢀClass B

ꢀyes ꢀno

[ ] (0-3)

Class

BCC check

Retry

Time out T1

[ ] (0-99)

Setting

Text format

- 50 -

Rack No.

Sex

ꢀnone ꢀ4 ꢀ5

ꢀyes ꢀno

AGE/MONTH

patient inf. 1

patient inf. 2

patient inf. 3

patient inf. 4

patient inf. 5

patient inf. 6

ID digits

ꢀyes ꢀno

ꢀyes[ ]digits ꢀno

[ ]digits (4-26)

Data format

ZERO Suppress

Sample Type

Dummy

Block Identification

ANL unit No.

Cuvette side

ꢀ6 ꢀ9

ꢀ

yes ꢀno

ꢀyes ꢀno

ꢀ

yes ꢀno

Sequence of S.No. and S.ID in ꢀ No. ꢀS.ID

T.R.I text

Sequence of S.No. and S.ID in ꢀ yes ꢀno

Test result text

Lot No. and Bottle No.

ꢀ

yes ꢀno

- 51 -

(5) ONLINE ALARM LIST

1)ONLINE ERROR [ aa ] [ bbbbbbbbb ]

(1). In the Online Parameter menu, submenu Error Control, if the T.R.I. receive has been designated

as "STOP", then the following will occur:

1) Text following the alarm will not be received.

2) In a case when the text requisition is received real-time,the "STOP" status is ignored at the start of

the next analysis and the text requisition will be received real-time again.

(2). In the Online Parameter menu, submenu Error Control, if the T.R.I. receive has been designated to "CONTINUE",

the test requisition for the next sample will be received real-time.

(1).Communication error occurs when transmittng the text for test requisition or when receiving the test requisition format.

(2).The display in the [ ] and its meaning are as follows.

aa : type of the errors

----------------------------------------------------------------

01 : Device name error

02 : Framing error

03 : Over run error

04 : Parity error

05 : Time out error

06 : Receive NAK when transmitting a text

07 : BCC error when receiving a text

08 : Other communication errors

09 : Function error (Full Duplex instead of Half Duplex)

10 : Unit name error

11 : Parameter error

12 : Request cancel

----------------------------------------------------------------

bbbbbbbbb

: Text having error

----------------------------------------------------------------

: Start text for receiving the test

requisition information.

: End text for receiving the test

requisition information.

R_ __ nnnn

: normal run, normal sample, sample No.

R_ _E nnnn

R_ _P nnnn

R_ U_ nnnn

R_ UE nnnn

R_ UP nnnn

R_ X_ nnnn

R_ XE nnnn

R_ XP nnnn

RH __ nnnn

RH _E nnnn

RH _P nnnn

RH U_ nnnn

RH UE nnnn

RH UP nnnn

: normal run, emergency sample, sample No.

: normal run, STAT sample, sample No.

: normal run, urine sample, sample No.

: normal run, urine emergency sample, sample No.

: normal run, urine STAT sample, sample No.

: normal run, urine sample, sample No.

: normal run, urine emergency sample, sample No.

: normal run, urine STAT sample, sample No.

: repeat run, normal sample, sample No.

: repeat run, emergency sample, sample No.

: repeat run, STAT sample, sample No.

: repeat run, urine sample, sample No.

: repeat run, urine emergency sample, sample No.

: repeat run, urine STAT sample, sample No.

R_ __ xxxxxxxxxxx: normal run, normal sample, sample ID

R_ _E xxxxxxxxxxx: normal run, emergency sample, sample ID

R_ _P xxxxxxxxxxx: normal run, STAT sample, sample ID

R_ U_ xxxxxxxxxxx: normal run, urine sample, sample ID

R_ UE xxxxxxxxxxx: normal run, urine emergency sample,sample ID

R_ UP xxxxxxxxxxx: normal run, urine STAT sample, sample ID

R_ X_ xxxxxxxxxxx: normal run, urine sample, sample ID

R_ XE xxxxxxxxxxx: normal run, urine emergency sample,sample ID

R_ XP xxxxxxxxxxx: normal run, urine STAT sample, sample ID

RH __ xxxxxxxxxxx: repeat run, emergency sample, sample ID

RH _E xxxxxxxxxxx: repeat run, emergency sample, sample ID

RH _P xxxxxxxxxxx: repeat run, STAT sample, sample ID

- 52 -

RH U_ xxxxxxxxxxx: repeat run, urine sample, sample ID

RH UE xxxxxxxxxxx: repeat run, urine emergency sample, sample ID

RH UP xxxxxxxxxxx: repeat run, urine STAT sample, sample ID

RH X_ xxxxxxxxxxx: repeat run, emergency sample, sample ID

RH XE xxxxxxxxxxx: repeat run, emergency sample, sample ID

RH XP xxxxxxxxxxx: repeat run, STAT sample, sample ID

----------------------------------------------------------------

- 53 -

2)ONLINE ERROR [ aa ] [ bbbbbbbbb ]

(1). In the Online Parameter menu, submenu Error Control, if the T.R.I. receive is designated as "STOP",

the following events can occur:

1). The text following the alarm will not be received.

2). In a case when the text requisition is received real-time,the "STOP" designation is ignored and the text requisition

will be received in real-time at the start of the next analysis.

(2). In the Online Parameter menu, submenu Error Control, if the T.R.I. receive is designated as "Continue",

the test requisition for the next sample will be received.

(1). Communication error occurs when transmitting the text for test requisition or receiving the test requisition format.

(2). The display in the [ ] and its meaning are as follows.

aa : type of the errors

----------------------------------------------------------------

01 : Device name error

02 : Framing error

03 : Over run error

04 : Parity error

05 : Time out error

06 : Receive NAK when transmitting a text

07 : BCC error when receiving a text

08 : Other communication errors

09 : Function error (Full Duplex instead of Half Duplex)

10 : Unit name error

11 : Parameter error

12 : Request cancel

----------------------------------------------------------------

bbbbbbbbb

: Text having error

----------------------------------------------------------------

: Start text for receiving the test

requisition information.

: End text for receiving the test

requisition information.

R_ __ nnnn

R_ _E nnnn

R_ _P nnnn

R_ U_ nnnn

R_ UE nnnn

R_ UP nnnn

R_ X_ nnnn

R_ XE nnnn

R_ XP nnnn

RH __ nnnn

RH _E nnnn

RH _P nnnn

: normal run, normal sample, sample No.

: normal run, emergency sample, sample No.

: normal run, STAT sample, sample No.

: normal run, urine sample, sample No.

: normal run, urine emergency sample, sample No.

: normal run, urine STAT sample, sample No.

: normal run, Other normal sample, sample No.

: normal run, Other emergency sample, sample No.

: normal run, Other STAT sample, sample No.

: repeat run, normal sample, sample No.

: repeat run, emergency sample, sample No.

: repeat run, STAT sample, sample No.

RH U_ nnnn

RH UE nnnn

RH UP nnnn

RH X_ nnnn

RH XE nnnn

RH XP nnnn

: repeat run, urine sample, sample No.

: repeat run, urine emergency sample, sample No.

: repeat run, urine STAT sample, sample No.

: repeat run, Other normal sample, sample No.

: repeat run, Other emergency sample, sample No.

: repeat run, Other STAT sample, sample No.

R_ __ xxxxxxxxxxx: normal run, normal sample, sample ID

R_ _E xxxxxxxxxxx: normal run, emergency sample, sample ID

R_ _P xxxxxxxxxxx: normal run, STAT sample, sample ID

R_ U_ xxxxxxxxxxx: normal run, urine sample, sample ID

R_ UE xxxxxxxxxxx: normal run, urine emergency sample, sample ID

R_ UP xxxxxxxxxxx: normal run, urine STAT sample, sample ID

R_ X_ xxxxxxxxxxx: normal run, Other normal sample, sample ID

R_ XE xxxxxxxxxxx: normal run, Other emergency sample, sample ID

R_ XP xxxxxxxxxxx: normal run, Other STAT sample, sample ID

RH __ xxxxxxxxxxx: repeat run, normal sample, sample ID

RH _E xxxxxxxxxxx: repeat run, emergency sample, sample ID

- 54 -

RH _P xxxxxxxxxxx: repeat run, STAT sample, sample ID

RH U_ xxxxxxxxxxx: repeat run, urine sample, sample ID

RH UE xxxxxxxxxxx: repeat run, urine emergency sample, sample ID

RH UP xxxxxxxxxxx: repeat run, urine STAT sample, sample ID

RH X_ xxxxxxxxxxx: repeat run, Other normal sample, sample ID

RH XE xxxxxxxxxxx: repeat run, Other emergency sample, sample ID

RH XP xxxxxxxxxxx: repeat run, Other STAT sample, sample ID

----------------------------------------------------------------

- 55 -

3)ONLINE FORMAT ERROR

<<Operation>>

(1).Disregard the test requisition information text for the sample generating the alarm.

(2).Continue to receive the test requisition information text for samples following the alarm.

<<Description>>

(1).In the Online Parameter menu, submenu Set Up, the T.R.I. receive is not designated asn "YES" for the necessary parameter.

(2).The display in the [ ] and its meaning are as follows.

aaaa

: Type of error

----------------------------------------------------------------

R_ __

R_ _E

R_ _P

R_ U_

R_ UE

R_ UP

R_ X_

R_ XE

R_ XP

: normal run, a normal sample

: normal run, an emergency sample

: normal run, a STAT sample

: normal run, a urine normal sample

: normal run, a urine emergency sample

: normal run, a urine STAT sample

: normal run, a Other normal sample

: normal run, an Other emergency sample

: normal run, a Other STAT sample

----------------------------------------------------------------

RH __

RH _E

RH _P

RH U_

RH UE

RH UP

RH X_

RH XE

RH XP

: repeat run, a normal sample

: repeat run, an emergency sample

: repeat run, a STAT sample

: repeat run, a urine normal sample

: repeat run, a urine emergency sample

: repeat run, a urine STAT sample

: repeat run, a Other normal sample

: repeat run, an Other emergency sample

: repeat run, a Other STAT sample

----------------------------------------------------------------

bbbbbbbbbb : Information type that is not designated

No sample No.

No ID No.

- 56 -

4)ONLINE ILLEGAL TEXT CODE [ aa ]

(1).Disregard the test requisition information text for the sample generating the alarm.

(2).Continue to receive the test requisition information text for samples following the alarm.

(1).When receiving the test requisition information text using online, the text classification code is out of specification.

(2).The display of [ ] and its meaning are as follows.

----------------------------------------------------------------

: Normal sample

: Repeat run sample

----------------------------------------------------------------

5)ONLINE ILLEGAL TEXT BLOCK No. [ aa -> bb ]

(1). In the Online Parameter menu, submenu Error Control, if the T.R.I. receive is designated as "STOP",

the following events occur:

1).Disregard the test requisition information text for the sample generating the alarm.

2).System will not receive text for samples following the sample generating the alarm.

3).In a case when the text requisition is received in real-time, the "STOP" is ignored and the text requisition text

will be received with real-time again during the next analysis.

(2). In the Online Parameter menu, submenu Error Control, if the T.R.I. receive is designated as "Continue",

the following events occur:

1).Disregard the test requisition information text for the sample generating the alarm.

2).The test requisition information text for the next sample will be received.

(1).When receiving the requisition information text using online, the block identification No. is out of specification.

(2).The display of [ ] and its meaning are as follows.

aa : Previously received block identification No.

bb : Last received block identification No.

- 57 -

6)ONLINE ILLEGAL SAMPLE No. [ aa: bbbbb ]

(1).Disregard the test requisition information text for the sample generating the alarm.

(2).Continue to receive the test requisition information text for other samples within the run.

(1).When receiving the test requisition information text using online, sample No. of the sample generating the alarm

does not meet the specification.

(2).The display of [ ] and its meaning are as follows.

: Sample type

----------------------------------------------------------------

: Normal sample

: Emergency sample

: Stat sample

: Urine normal sample

: Urine emergency sample

: Urine stat sample

: Other Normal sample

: Other Emergency sample

: Other Stat sample

----------------------------------------------------------------

bbbb : Sample No.

----------------------------------------------------------------

0001-9999 : Normal sample

E001-E999 : Emergency

P001-P999 : Stat sample

----------------------------------------------------------------

- 58 -

7)ONLINE ILLEGAL RACK No. [ aaaaaaa: b: cccccccc ]

(1). In the Online Parameter menu, submenu Error Control, if the T.R.I. receive is designated as "STOP",

the following events occur:

1).Disregard the test requisition information text for the sample generating the alarm.

2).System will not receive text for samples following the sample generating the alarm.

3).In a case when the text requisition is received in real-time, the "STOP" is ignored and the text requisition text

will be received with real-time again during the next analysis.

(2). In the Online Parameter menu, submenu Error Control, if the T.R.I. receive is designated as "Continue",

the following events occur:

1).Disregard the test requisition information text for the sample generating the alarm.

2).The test requisition information text for the next sample will be received.

(1).When receiving the requisition information text using online, the rack No. is out of specification.

(2).The display of [ ] and its meaning are as follows.

aaa

: Transferred sample type and sample No.

---------------------------------------------------------------

__ nnnn

_E nnnn

_P nnnn

U_ nnnn

UE nnnn

UP nnnn

X_ nnnn

XE nnnn

XP nnnn

bbb

: Normal sample

: Emergency sample

: Stat sample

: Urine normal sample

: Urine emergency sample

: Urine stat sample

: Other normal sample

: Other emergency sample

: Other Stat sample

: Received sample type and sample No.

---------------------------------------------------------------

__ nnnn

_E nnnn

_P nnnn

U_ nnnn

UE nnnn

UP nnnn

X_ nnnn

XE nnnn

XP nnnn

: Normal sample

: Emergency sample

: Stat sample

: Urine normal sample

: Urine emergency sample

: Urine stat sample

: Other normal sample

: Other emergency sample

: Other Stat sample

---------------------------------------------------------------

: Received the kind of rack

----------------------------------------------------------------

: Normal sample rack

: Emergency rack

: Repeat run rack

----------------------------------------------------------------

ccccccc : Received rack No. and position in rack

- 59 -

8)ONLINE ILLEGAL SAMPLE KIND No. [ aa ]

(1).Disregard the test requisition information text for the sample generating the alarm.

(2).Continue to receive the test requisition information text for the other samples within the run.

(1).When receiving the test requisition information text using online, sample kind No. of the sample generating the alarm

does not meet the specification.

(2).The display of [ ] and its meaning are as follows.

: Sample type

----------------------------------------------------------------

: Normal sample

: Emergency sample

: Stat sample

: Urine normal sample

: Urine emergency sample

: Urine stat sample

: Other normal sample

: Other emergency sample

: Other stat sample

----------------------------------------------------------------

9)ONLINE ILLEGAL GENDER TEXT [ a ]

(1).Disregard the test requisition information text for the sample generating the alarm.

(2).Continue to receive the test requisition information text for other samples within the run.

(1).When receiving the requisition information text using online, the sex of this text is not within the specification.

(2).The display of [ ] and its meaning are as follows.

: Received sex

10)ONLINE ILLEGAL AGE/MONTH [ aaa bb ]

(1).Disregard the test requisition information text for the sample generating the alarm.

(2).Continue to receive the test requisition information text for other samples within the run.

(1).When receiving the requisition information text using online, age or month age (age for baby before one year old) of this

text is out of the specification.

(2).The display of [ ] and its meaning are as follows.

aaa

: Received age

: Received month age

- 60 -

11)ONLINE ANALYSIS METHOD MISMATCH [ aa <> bb ]

(1).Disregard the test requisition information text for the sample generating the alarm.

(2).Continue to receive the test requisition information text for other samples within the run.

(1).When receiving the test requisition information text using online, sample type of this text does not match

the required sample type.

(2).The display of [ ] and its meaning are as follows.

: Sample type

----------------------------------------------------------------

: Normal sample

: Emergency sample

: Stat sample

: Urine normal sample

: Urine emergency sample

: Urine stat sample

: Other normal sample

: Other emergency sample

: Other Stat sample

----------------------------------------------------------------

bb : Received sample type

----------------------------------------------------------------

: Normal sample

: Emergency sample

: Stat sample

: Urine normal sample

: Urine emergency sample

: Urine stat sample

: Other normal sample

: Other emergency sample

: Other Stat sample

----------------------------------------------------------------

12)ONLINE SAMPLE No. MISMATCH [ aaaaaa <> bbbbbb ]

- 61 -

(1).Disregard the test requisition information text for the sample generating the alarm.

(2).Continue to receive the test requisition information text for the other samples within the run.

(1).When receiving the test requisition information text using online, sample type of this does not match the required sample.

(2).The display of [ ] and its meaning are as follows.

aaaaaaa

: Transferred sample type and sample No.

---------------------------------------------------------------

__ nnnn

_E nnnn

_P nnnn

U_ nnnn

UE nnnn

UP nnnn

X_ nnnn

XE nnnn

XP nnnn

: Normal sample

: Emergency sample

: Stat sample

: Urine normal sample

: Urine emergency sample

: Urine stat sample

: Other normal sample

: Other emergency sample

: Other Stat sample

---------------------------------------------------------------

bbbbbb : Received sample type and sample No.

---------------------------------------------------------------

__ nnnn

_E nnnn

_P nnnn

U_ nnnn

UE nnnn

UP nnnn

X_ nnnn

XE nnnn

XP nnnn

: Normal sample

: Emergency sample

: Stat sample

: Urine normal sample

: Urine emergency sample

: Urine stat sample

: Other normal sample

: Other emergency sample

: Other Stat sample

---------------------------------------------------------------

- 62 -

13)ONLINE RACK No. MISMATCH [ aaaaaa : bbbb <> cccc ]

(1). In the Online Parameter menu, submenu Error Control, if the T.R.I. receive is designated as "STOP",

the following events occur:

1).Disregard the test requisition information text for the sample generating the alarm.

2).System will not receive text for samples following the sample generating the alarm.

3).In a case when the text requisition is received in real-time, the "STOP" is ignored and the text requisition text

will be received with real-time again during the next analysis.

(2). In the Online Parameter menu, submenu Error Control, if the T.R.I. receive is designated as "Continue",

the following events occur:

1).Disregard the test requisition information text for the sample generating the alarm.

2).The test requisition information text for the next sample will be received.

(1).When receiving the test requisition information text using online, rack No. of this does not match the required sample.

(2).The display of [ ] and its meaning are as follows.

aaaaaaaaa : Transferred sample type and sample No.

---------------------------------------------------------------

__ nnnn

_E nnnn

_P nnnn

U_ nnnn

UE nnnn

UP nnnn

X_ nnnn

XE nnnn

XP nnnn

: Normal sample

: Emergency sample

: Stat sample

: Urine normal sample

: Urine emergency sample

: Urine stat sample

: Other normal sample

: Other emergency sample

: Other Stat sample

---------------------------------------------------------------

bbbb : Transferred rack No.

---------------------------------------------------------------

cccc : Received rack No.

---------------------------------------------------------------

14)ONLINE MISMATCH [ aaaaaaaaaa <> bbbbbbbbbbb ]

(1).Disregard the test requisition information text for the sample generating the alarm.

(2).Continue to receive the test requisition information text for the other samples within the run.

(1).When receiving the test requisition information text using online, sample ID of this text does not match

the required ones.

(2).The display of [ ] and its meaning as follows.

aaaaaaaaa

bbbbbbbbb

: Transferred sample ID

: Received sample ID

- 63 -

15)ONLINE ITEM ERROR [ aaaaaaaa ]

(1).Disregard the test requisition information text for the sample generating the alarm.

(2).Continue to receive the test requisition information text for the other samples within the run.

(1).When receiving the test requisition information text using online, the test requisition cannot be stored.

(2).The display of [ ] and its meaning are as follows.

aaaaaa

: Sample type and sample No.

---------------------------------------------------------------

__nnnn

: Normal sample

__Ennn

__Pnnn

_U_nnn

_UEnnn

_UPnnn

_Xnnnn

_XEnnn

_XPnnn

H_nnnn

H_Ennn

H_Pnnn

HUnnnn

HUEnnn

HUPnnn

HXnnnn

HXEnnn

HXPnnn

: Emergency sample

: Stat sample

: Urine normal sample

: Urine emergency sample

: Urine stat sample

: Other normal sample

: Other emergency sample

: Other Stat sample

: repeat run normal sample

: repeat run emergency sample

: repeat run stat sample

: repeat run urine normal sample

: repeat run urine emergency sample

: repeat run urine stat sample

: repeat run other normal sample

: repeat run other emergency sample

: repeat run other stat sample

---------------------------------------------------------------

- 64 -

16)ONLINE RERUN ITEM ERROR [ aaaaaaaa ]

(1).Disregard the repeat run test requisition information for the sample generating the alarm.

(2).Continue to receive the test requisition information text for the other samples within the run.

(1).When receiving the test requisition information text for repeat run using online, repeat run test requisition cannot be

stored with for the following reasons.

1).Original sample that is designated in the repeat run text is not stored in the normal run/sample test requisition

information.

2).Sample No. is not set to the original sample that is designated in the repeat run text.

3).Original sample that is designated in the repeat run text has already been stored as a repeat run sample

for another sample.

(2).The display of [ ] and its meaning are as follows.

----------------------------------------------------------------

aaaaaa

: sample type and original sample No.

: Normal sample

: Emergency sample

: Stat sample

: Urine normal sample

: Urine emergency sample

: Urine stat sample

: Other normal sample

: Other emergency sample

: Other Stat sample

__nnnn

__Ennn

__Pnnn

_Unnnn

_UEnnn

_UPnnn

_Xnnnn

_XEnnn

_XPnnn

----------------------------------------------------------------

- 65 -

MTD Shredder 770 95 7B User Manual
Motorola I296 H88XAH6JR2AN User Manual
Lindy 42791 User Manual
LG Electronics VENUS User Manual
Dell Latitude Computer L400 User Manual
Capresso AD10BLK User Manual
Bunn Single 270387000H User Manual
Bookendz BE MBP17 User Manual
Aluratek ACSSDM64F User Manual
Addonics Technologies ZHDUESA User Manual