TABLE OF CONTENTS
INTRODUCTION
PRODUCT OVERVIEW
WWVB RADIO CONTROLLED TIME
GETTING STARTED
BATTERY INSTALLATION
ATOMIC CLOCK
CALENDAR AND CLOCK
DISPLAY MODES
MANUAL SETTINGS
LIGHT/SNOOZE
3
3
6
7
7
7
7
8
10
10
11
DISABLING ALARM
PROGRAMMING SNOOZE
INTERVAL
INDOOR TEMPERATURE
MOON PHASE
11
11
12
13
14
Radio Controlled
Digital Alarm Clock
with Thermometer
and Moon Phase
PRECAUTIONS
SPECIFICATIONS
DATEXX WARRANTY
INFORMATION
(DRC-604)
USER'S MANUAL
2
DATEXX RC171W MANUAL (English)
SIZE: W65 X H105 (mm)
BY EMILY TSOI 30/12/05
INTRODUCTION
FRONT VIEW
Thank you for selecting the
Atomic Alarm
A. RADIO CONTROLLED CLOCK WITH
INDOOR TEMPERATURE AND
MOON PHASE IN A TWO - LINE
LCD DISPLAY
Clock.
This device includes precise time keeping, moon phase
and temperature monitoring features that you can use
from the comfort of your home.
In this package you will find:
F
• One Table Alarm Clock
• One User Manual
Time of Day with
Seconds, US Time
Zone Map
Please keep this manual handy as you use your new
item. It contains practical step-by-step instructions,
as well as technical specifications and precautions
you should know.
PM
Indoor Temperature
and Alarms
MONTH
DATE
1
2
Moon Phase Indicator
Day of the week
2
1
MODE
SET
SET
PRODUCT OVERVIEW
Calendar
G
FEATURES
C
E
D
B
*Precise time and date set via RF signals from the
US Atomic Clock
*Calendar displaying date with month and day of
the week in English, Spanish or French
*Indoor temperature display with trend indicator
*Moon Phase indicator
SIZEAAA/UM4
SIZEAAA/UM4
*User-selectable temperature display in Celsius or
Fahrenheit
*User-selectable 12 or 24 hour time format
*Dual crescendo alarm with snooze
*Programmable snooze interval (one to 59 minutes)
3
4
TIME FORMAT
SETTING THE ALARM
To set the Alarm1,
* Press UP( ) button to toggle
between 12 and 24 hour time format
PM
* Press MODE button once to display
ALARM TIME 1. If the alarm is off,
the default time “6:00” will be
displayed.
PM
MONTH
DATE
MONTH
DATE
ALARM
1
AM
* Press and hold SET1 button for two
seconds. The hour digit will flash.
* Enter the hour using DOWN ( ) or
UP ( ).
MONTH
DATE
PM
* Press SET1 button again. The minute
digits will flash.
MONTH
DATE
ALARM 1
DAY OF THE WEEK LANGUAGE
* Press and hold DOWN ( ) button
for 3 seconds: the default language
abbreviation will flash (example – EN)
AM
* Enter the minutes using DOWN (
)
PM
or UP ( ).
* Press SET1 button again to confirm:
MONTH
DATE
DATE
DATE
1
PM
an icon [ ] will appear on the
* Continue holding DOWN (
)
display next to the alarm time.
* Repeat the same procedure to set an
Alarm2, using SET2 button.
button until the desired day of the
week language abbreviation is
selected.
MONTH
DATE
ALARM 1
AM
1
PM
* Release the DOWN ( ) button to
confirm the setting.
MONTH
LIGHT/SNOOZE
When the alarm sounds, press the LIGHT/SNOOZE
PM
button to temporarily stop the alarm. After the LIGHT/
SNOOZE is depressed, the alarm sound will resume in
five minutes.
MONTH
If the alarm is not disabled after that, it will sound for
four more minutes and then will stop by itself.
ALARMS
DISABLING ALARM
There are two available alarms –Alarm 1 and Alarm 2.
If any of alarms is activated, it will sound at the set time
and the alarm icon will flash Mondays through Fridays.
Press SET1 or SET2 buttons on the unit to disable any of
the alarms.
When Alarm1 and Alarm2 are disabled, an applicable
1
2
icon [ ] or [ ]will disappear from the unit’s display.
9
10
PROGRAMMING THE SNOOZE INTERVAL
* Press and hold SET1 button for two seconds to
activate an Alarm1 programming mode. Alarm1 hour
digit will flash.
PRECAUTIONS
This product is engineered to give you years of satisfactory
service if handled carefully. Here are a few precautions:
* Do not immerse the unit in water.
* Adjust the desired hour using UP ( ) or DOWN (
buttons.
)
* Do not clean the unit with abrasive or corrosive
materials. They may scratch the plastic parts and
corrode the electronic circuits.
* Press SET1 button: the minute digits will flash.
* Adjust the desired minutes using UP ( ) or
DOWN ( ) buttons.
* Do not subject the product to excessive force, shock,
dust, temperature, or humidity, which may result in
malfunctions, shorter lifespan, damaged batteries, and
damaged parts.
* Press SET1 button again:
PM
the snooze interval minutes
will flash.
* Do not tamper with the unit’s internal components.
Doing so will invalidate the warranty and may cause
damage. The unit contains no user-serviceable parts.
* Use only fresh batteries. Do not mix new and old batteries.
* Read the user's manual thoroughly before operating
the unit.
MONTH
DATE
ALARM
1
AM
* Adjust the desired interval time using UP ( ) or
DOWN ( )buttons.
* Press SET2 button to confirm set snooze interval.
Use the same procedure to program the snooze interval
for Alarm2.
INDOOR TEMPERATURE
The indoor temperature shares the same display’s line
with the calendar and the day of the week.
NOTE: If the indoor temperature goes above or below
operating range stated in specifications, the display will
show dashes [
]
MOON PHASE
Moon phase indicator is displayed in accordance with
the calendar.
New
Waning First Waxing Full Waning Last
Waning
Moon Crescent Quarter Gibbous Moon Gibbous Quarter Crescent
11
12
SPECIFICATIONS
Indoor Temperature
Proposed operating range
DATEXX WARRANTY INFORMATION
TELEDEX Limited U.S.A. Warranty
: -5.0°C to +50.0°C/
23.0°F to 122.0°F
: 0.1°C/0.2°F
TELEDEX INC. warrants these products to the original
purchaser to be free from defective material and
workmanship.
The product will be repaired or replaced at our option,
for up to one year when returned with proof of purchase to
the address below. Include a check or money order for
$5.00 to cover postage.
Temperature resolution
User-selectable (F° or C°) temperature display
Calendar and Clock
12/24 hour display in hh: mm format
Date format: month – day format
US Time Zone map
Warranty valid only in the U.S.A.
TELEDEX INC. 1 Atlas st. Kenilworth, NJ 07033
Day of the week: User-selectable in three languages
(English, Spanish or French)
Dual 4 minute crescendo alarm with snooze
Programmable snooze interval (one to 59 minutes)
Moon Phase
LED Backlight
Power
2 AAA size (UM-4) 1.5V batteries (not included)
Dimensions
4.72(L) x 2.87(H) x 1.65(D) inches
13
14
|