CP308S
INSTRUCTION MANUAL
Contents
Warnings and Precautions ............................................................................... 2
Important Safety Instructions............................................................................ 3
In the Box, Features, & Powering the Unit ....................................................... 4
Setting the Clock, Setting the Alarms, & Tuning the AM/FM Radio.................. 5
Locations of Controls & Control Definitions................................................... 6-7
Service Information........................................................................................... 8
Important Safety Instructions
1. Read Instructions - All the safety and operating instruction should be read
before the product is operated.
15. Outdoor Antenna Grounding - If an outside antenna is connected to
the receiver, be sure the antenna system is grounded so as to provide some
protection against voltage surges and built-up static charges. Article 810 of
the National Electrical Code, ANSI/NFPA 70, provides information with
regard to proper grounding of the mast and supporting structure, grounding
of the mast and supporting structure, grounding of the lead-in wire to an
antenna-discharge unit, size of grounding conductors, location of antenna-
discharge unit, connection to grounding electrodes, and requirements for the
grounding electrode.
ꢀ. Retain Instructions - The safety and operating instruction should be
retained for future reference.
3. Heed Warnings - All warning on the product and in the operating
instructions should be adhered to.
4. Follow instructions - All operating and use instructions should be
followed.
See figure:
5. Cleaning - Unplug this product from the wall outlet before cleaning. Do
not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6. Attachments - Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this product near water - for example,
near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement,
or near a swimming pool, and the like.
8. Accessories - Do not place this product on an unstable cart, stand tripod,
bracket, or table. The product may fall, causing serious injury to a child
or adult, and serious damage to the product. Use only with a cart, stand,
tripod, bracket, or table recommended by the manufacturer, or sold with
the product. Any mounting of the product should follow the manufacturer’s
instructions, and should use a mounting accessory recommended by the
manufacturer.
16. Lightning - For added protection for this product during a lightning
storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable system.
This will prevent damage to the product due to lightning and power-line
surges.
9. A product and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and cart
combination to overturn.
17. Power Lines - An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or power circuits,
or where it can fall into such power lines or circuits. When installing
an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.
18. Overloading - Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electric shock.
19. Object and Liquid Entry - Never push objects of any kind into this
product through openings as they may touch dangerous voltage points or
short-out parts that could result in a fire or electric shock. Never spill liquid
of any kind on the product.
10. Ventilation - Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and to protect it
from overheating, and these openings must not be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa,
rug, or other similar surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided
or the manufacturer’s instruction have been adhered to.
ꢀ0. Servicing - Do not attempt to service this product yourself as opening
or removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
ꢀ1. Damage Requiring Service - Unplug this product from the wall outlet
and refer servicing to qualified service personnel under the following
conditions:
11. Power Sources - This product should be operated only from the type of
power source indicated on the marking label. If you are not sure of the type
of power supply to your home, consult your product dealer or local power
company. For products intended to operate from battery power, or other
sources, refer to the operating instruction.
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
1ꢀ. Grounding or Polarization - This product may be equipped with a
polarized alternating-current line plug (a plug having one blade wider than
the other). This plug will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your electrician
to replace your obsolete outlet. Do not defeat the safety purpose of the
polarizes plug.
d) If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operating
instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to its normal operation.
Alternate Warnings - This product is equipped with a three-wire grounding-
type plug, a plug having a third (grounding) pin. This plug will only fit into
a grounding-type power outlet. This is a safety feature. If you are unable
to insert the plug into the outlet, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the grounding-type
plug.
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance - this
indicates a need for service.
ꢀꢀ. Replacement Parts - When replacement parts are required, be sure the
service technician has used replacement parts specified by the manufacturer
or have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
13. Power-Cord Protection - Power supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience
receptacles, and point where they exit from the product.
ꢀ3. Safety Check - Upon completion of any service or repairs to this
product, ask the service technician to perform safety checks to determine
that the product is in proper operating condition.
14. Protective Attachment Plug - The product is equipped with an
attachment plug having overload protection. This is a safety feature. See
Instruction Manual for replacement or resetting of protective device. If
replacement of the plug is required, be sure the service technician has
used a replacement plug specified by the manufacturer that has the same
overload protection as the original plug.
ꢀ4. Wall or Ceiling Mounting - The product should be mounted to a wall or
ceiling only as recommended by the manufacturer.
ꢀ5. Heat - The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers)
that produce heat.
3
In the Box
• CP308S
• Documentation
Features
• AM/FM Clock Radio
• Dual Alarm
• Gradual Wake
• Wake to Radio, Buzzer or Nature
Sounds
• Snooze Function
• Amber LED Projection Display
• Display Time on Ceiling, Wall, etc
with the Projection feature
• Reversible Display Orientation
• Projection Display has 90° adjustment
range
• Sleep Function
• Dual Speakers built in
• Battery Backup keeps time during
power outage
• ꢀ Nature Sounds
• 0.9” Amber LED Display
• Display Dimmer Control
• Line-In Jack
• AC: 110V AC Line Cord built in
• Battery Backup for Clock, (battery not
included)
Powering the Unit
Power the unit by connecting it to a standard AC outlet (1ꢀ0V ~ 60Hz) via the at-
tached AC cord.
Battery Backup
ꢀ AA Batteries can be inserted into the bottom of the unit to serve as a battery backup
in case of a power failure.
Note, the battery power for this unit is meant as a backup only, and will not sustain the
units power for an extended period of time.
4
Setting the Clock
1. Turn the unit off by pressing the Power Button.
ꢀ. Press and hold the Time Button.
3. While holding the Time Button, press the Hour Button to adjust the hour and the
Minute Button to adjust the minute.
4. Release the Time Button to set the time.
Setting the Alarms
1. Turn the unit off by pressing the Power Button.
ꢀ. Press and hold the AL 1 Button or AL 2 Button.
3. While holding the AL 1 Button or AL 2 Button, press the Hour Button to adjust
the hour and the Minute Button to adjust the minute.
4. Release the AL 1 Button or AL 2 Button to set the alarm time.
The AL 1 time represents alarm #1 and AL 2 represents alarm #2.
5. Adjust the Alarm 1 and/or Alarm 2 Switches to radio, N1 (nature sound #1), Nꢀ
(nature sound #ꢀ), or buzzer.
6. When the set alarm time is reached, the alarm will sound to the designated mode
(radio, N1, Nꢀ, or buzzer).
7. Press the Power Button to turn the unit on.
8. Press the AL 1 Button or AL 2 Button to turn on alarm 1 or alarm ꢀ.
A light will appear on the LCD Display to indicate that alarm 1 or alarm 2 is
activated.
Tuning the AM/FM Radio
1. Turn the unit on by pressing the Power Button.
ꢀ. Adjust the Radio/N1/N2/Line In Switch to radio mode.
3. Adjust the AM/FM Switch to AM or FM radio.
4. Turn the Tuning Dial to adjust the AM or FM radio station.
The current AM or FM radio station is indicated by the Radio Frequency Display
on the front of the unit.
5
Operations
1
ꢀ
1ꢀ
13
3
4
14
15
5
6
16
17
7
18
8
9
10
11
19
ꢀ0
6
Operations
1
2
3
4
5
Projection Display
The Projection Display projects the time onto wall.
Projection Button
Press the Projection Button to activate the Projection Display.
Power Button
Press the Power Button to turn the unit off and on.
Radio/N1/N2/Line In Switch
Adjust the Radio/N1/Nꢀ/Line In Switch to switch between radio, nature sound 1 or ꢀ, and Line Input mode.
AL 1 & AL 2 Button
Press and hold the AL 1 & AL ꢀ Buttons, while the unit is powered off to set alarm 1 and alarm ꢀ.
Press the AL 1 & AL ꢀ Buttons, with the unit powered on, to activate alarm 1 and alarm ꢀ.
6
7
8
9
Snooze
Press the Snooze Button after the alarm sounds to delay the alarm for an additional 9 minutes.
Tuning Dial
Turn the Tuning Dial to adjust the AM and FM radio station.
Volume Dial
Turn the Volume Dial to adjust the volume of audio output from the unit.
Line Input
Use the Line Input to connect an MP3 player or other audio device to the unit.
10 Focus Dial
Turn the Focus Dial to focus the light from the Projection Display.
11 Rotate Projection Dial
Turn the Rotate Projection Dial to adjust the angle of the Projection Display.
12 Reverse Button
Press the Reverse Button to reverse the projection from the Projection Display.
13 Dimmer Button
Press the Dimmer Button to dim the LCD Display.
14 AM/FM Switch
Adjust the AM/FM Switch to switch between AM and FM radio when in radio mode.
15 Hour & Minute Buttons
Press the Hour & Minute Buttons when setting the time or alarm.
16 Time Button
Press and hold the Time Button with the unit turned off to adjust the time.
17 Sleep Button
Press the Sleep Button to set the sleep timer between 10-90 minutes in 10 minute increments.
18 Alarm 1 & Alarm 2 Switch
Adjust the Alarm 1 or Alarm ꢀ Switch to set alarm #1 or alarm #ꢀ to wake to the radio, nature sound 1 or ꢀ, or
the buzzer.
19 FM Wire Antenna
Use the FM Wire Antenna to improve the reception of the FM radio.
20 AC Power Cable
Plug the AC Power Cable into a standard AC outlet (1ꢀ0V~60Hz) to power the unit.
7
Service Information
Address ꢀ116 Carr Street, St. Louis MO, 63106
Phone
Fax
Email
1-314-6ꢀ1-ꢀ881
1-314-588-1805
Website www.gpx.com
To download this Instruction Man- Para descargar este manual de Pour télécharger ce manuel
ual in English, Spanish, or French instrucción en inglés, español, o d’instruction en anglais, espagnol,
visit the Support section at
francés visite la sección de la ayu- ou le Français visitez la section de
©
ꢀ007 DPI, Inc. All trademarks appearing herein are the property of their respective owners. All products subject to change without notice.
|