CD-RECEIVER
KDC-U7046BT
KDC-U7046BTL
KDC-U6046
KDC-U6046L
INSTRUCTION MANUAL
The latest version of the Instruction Manual can be downloaded from
to check whether your manual is the latest one.
© B64-4640-10/01 (MW/M3W)
Before use
Notes
2WARNING
• If you experience problems during installation,
consult your Kenwood dealer.
• When you purchase optional accessories, check with
your Kenwood dealer to make sure that they work
with your model and in your area.
To prevent injury or fire, take the following
precautions:
• To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
• Characters that conform to ISO 8859-1 can be
displayed.
Before using this unit for the first time
This unit is initially set on the Demonstration mode.
When using this unit for the first time, cancel the
Demonstration mode. Refer to <Exit Demonstration
Mode> (page 4).
• To display characters in the following language,
additional setting is required.
KDC-U7046BT KDC-U6046
- Chinese
Refer to 32 Chinese language setting of <Function
setting> (page 15).
KDC-U7046BTL KDC-U6046L
How to reset your unit
• If the unit fails to operate properly, press
the Reset button. The unit returns to factory
- Arabic
- Persian
- Thai
settings when the Reset button is pressed.
Reset button
Refer to 33 Language setting of <Function setting>
(page 15).
• The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on the
display on the actual equipment, and some of the
illustrations on the display may be inapplicable.
Cleaning the Unit
Handling CDs
If the faceplate of this unit is stained, wipe it with a
clean soft dry such as a silicon cloth.
• Do not touch the recording surface of the CD.
• Do not stick tape etc. on the CD, or use a CD with
tape stuck on it.
• Do not use disc type accessories.
• Clean from the center of the disc and move
outward.
• When removing CDs from this unit, pull them out
horizontally.
If the faceplate is stained badly, wipe the stain off with
a cloth moistened with a neutral cleaner, then wipe it
again with a clean soft dry cloth.
Applying spray cleaner directly to the unit may affect
its mechanical parts. Wiping the faceplate with a
hard cloth or using a volatile liquid such as thinner or
alcohol may scratch the surface or erase characters.
• If the CD center hole or outside rim has burrs,
use the CD only after removing the burrs with a
ballpoint pen etc.
Unit and Faceplate Terminals
• To prevent deterioration, do not touch the terminals
of the unit and faceplate with your fingers.
• If the terminals on the unit or faceplate get dirty,
wipe them with a clean soft dry cloth.
CDs that cannot be used
• CDs that are not round cannot be used.
• CDs with coloring on the recording surface or CDs
that are dirty cannot be used.
Lens Fogging
When you turn on the car heater in cold weather,
dew or condensation may form on the lens in the
CD player of the unit. Called lens fogging, this
condensation on the lens may not allow CDs to play.
In such a situation, remove the disc and wait for the
condensation to evaporate. If the unit still does not
operate normally after a while, consult your Kenwood
dealer.
• This unit can only play the CDs with
This unit may not correctly play discs which do not
have the mark.
• You cannot play a CD-R or CD-RW that has not
been finalized. (For the finalization process refer to
your CD-R/CD-RW writing software, and your CD-R/
CD-RW recorder instruction manual.)
• 3 inch CD cannot be used. Attempt to insert using
an adapter can cause malfunction.
.
English
|
3
Basic Operations
KDC-U7046BT
KDC-U7046BTL
Microphone
[
] [SRC]
[
]
USB Terminal
0
Release
Disc slot
KDC-6046
KDC-6046L KDC-6046L
KDC-6046
Control
Knob
Auxiliary input
[
] [FNC]
[ENTER] [FAVORITE]
[AUDIO]
KDC-7046BT
[DISP]
KDC-7046BT
KDC-7046BTL KDC-7046BTL
[
]
[
]
Adjusting the Clock & Date
1 Press the [FNC] button to enter the Function
setting mode.
Before Using
Exit Demonstration Mode
Turn off the demonstration mode when you use it
for the first time after installation.
2 The item can be selected and determined as
follows.
”Settings” ➜“Clock & Date” ➜“Clock Adjust”
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
1 Press the [ENTER] button to quit the
demonstration mode when the messages “To
Cancel DEMO Press the ENTER Key” are displayed
(approx. 15 seconds).
3 Turn the Control knob to adjust the hour, and
then press the [ENTER] button.
2 Turn the Control knob to select “YES”, and then
press the [ENTER] button.
The demonstration mode can also be canceled
in the Function setting mode. Refer to 40 Demo
Mode of <Function setting> (page 15).
4 Turn the Control knob to adjust the minute, and
then press the [ENTER] button.
5 Turn the Control knob to select “Date Adjust”, and
then press the [ENTER] button.
6 Turn the Control knob to adjust the year, and
then press the [ENTER] button.
7 Turn the Control knob to adjust the month, and
then press the [ENTER] button.
8 Turn the Control knob to adjust the day, and then
press the [ENTER] button.
9 Turn the Control knob to select “Date Mode”, and
then press the [ENTER] button.
10 Turn the Control knob to select Date format, and
then press the [ENTER] button.
11 Press the [
] button for at least 1 second to
exit the Function setting mode.
|
4
KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L
select a folder.
Common Operation
Selecting a Song
Power and source selection
Push the Control knob towards right or left to
select a song (track or file).
Turns the power ON by pressing the [SRC]
button.
When the power is ON, select a source.
Press the [SRC] button and then turn the Control
knob. To determine the selected source, press the
[ENTER] button.
Fast Forwards or Fast Backwards the music
Push and hold the Control knob towards right or
left to fast-forward or fast-backward the audio file
containing songs (tracks or files).
Tuner (“TUNER”) ➜ Bluetooth Audio (“BT AUDIO”)
(KDC-U7046BT/ KDC-U7046BTL only) ➜ USB
(“USB”) or iPod (“iPod”) ➜ CD (“CD”) ➜ Auxiliary
Input (“AUX”) ➜ Standby (“STANDBY”) ➜ Tuner...
Keep the [SRC] button for at least 1 second to
turn the power OFF.
Pause and play
Press the [
playing a song (track or file).
] button to pause or resume
Removing Disc and USB device
Press the [0] button to eject a disc.
Keeping the button pressed for at least 2 seconds
enters the USB Remove mode (“USB REMOVE” is
displayed) and the USB device can be removed
safely.
⁄
• You can select the source selection mode to switch
between sources each time you press the [SRC] button. Set
29 Source Select Mode of <Function setting> (page 15) to“2”.
• The source “iPod” and “CD” can be selected when each
source is ready to play.
⁄
• CA-U1EX (optional accessory) is
• When an optional accessory is connected, the source name
for each device appears.
recommended to connect a USB
device.
CA-U1EX
Volume
Turn the Control knob to adjust the sound
volume.
Display scroll
• KCA-iP101 (optional accessory) is recommended to connect
an iPod.
• For the playable audio files, devices, iPod, see <Appendix>
(page 33).
KDC-U6046 KDC-U6046L
Keep the [DISP] button pressed down to scroll
through the CD or audio file text display.
KDC-U7046BT KDC-U7046BTL
Keep the Control knob pushed towards up to
scroll through the CD or audio file text display.
Listening to Radio
Selecting a Tuner source
1 Press the [SRC] button.
2 Turn the Control knob to select “TUNER”, and
then press the [ENTER] button.
Auxiliary input
Portable audio device can be connected with the
stereo mini-plug (3.5 mm ø).
Playing Music (CD/USB/iPod)
Playing Disc
Insert the disc in the Disc slot.
When inserted, the source is switched
automatically and a song starts playing.
Selecting the Band
Push the Control knob towards up to change the
band in the order of FM1 ➜ FM2 ➜ FM3.
Push the Control knob towards down to change
the band to AM.
Selecting a Station
Playing USB device
Push the Control knob leftward and rightward to
select the station you want to listen to.
Connect a USB device or iPod to the USB
terminal.
When connected, the source is switched
automatically and a song starts playing.
⁄
• Details of the station selecting in operation are set in the 22
Seek Mode of <Function setting> (page 15).
Selecting an Audio file folder
Push the Control knob towards up or down to
English
|
5
General opreration
Function of KDC-U6046/ KDC-U6046L
Muting the audio upon reception of
phone call
Removing the Faceplate
The faceplate of the unit can be detached and taken
with you, helping to deter theft.
The audio system automatically mutes when a call
comes in.
Detaching the Faceplate
Press the Release button.
When a call comes in
“CALL” is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The “CALL” display disappears and the audio system
comes back ON.
When the call ends
Hang up the phone.
The “CALL” display disappears and the audio system
comes back ON.
Reattaching the Faceplate
Refer to the following diagram when
reattaching the faceplate.
⁄
• To use the TEL Mute feature, you need to hook up the MUTE
wire to your telephone using a commercial telephone
accessory. Refer to <Connecting Wires to Terminals> (Quick
Start Guide).
¤
• Remove the faceplate at once after pressing the Release
button; otherwise it can fall down due to vibration.
• The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts.
• Keep the faceplate in its faceplate case while detached.
• Do not place the faceplate (and the faceplate case) in areas
exposed to direct sunlight, excessive heat or humidity. Also
avoid places with too much dust or the possibility of water
splashing.
|
6
KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L
Audio Adjustments
• About Supreme
Audio Control
Technology to extrapolate and supplement with proprietary
algorithm, the high-frequency range that is cut off when
encoding at low bit rate (less than 128Kbps, Sampling
frequency is 44.1kHz).
Supplementing is optimized by compression format (AAC,
MP3 or WMA) and processed according to bit rate.
The effect is negligible with music that is encoded at high
bit rate, variable bit rate or has minimal high frequency
range.
You can adjust following Audio Control items;
Display
Audio item
Range
“SubWoofer”
“Bass Boost”
“System Q”
Subwoofer output OFF/ON
Bass Boost
Preset Equalizer
curve
Level1/Level2/OFF
“Rock”/“Pops”/“Easy”/
“Top40”/“Jazz”/ ”Game”/
“Natural”/“User”‡
“Bass Adjust”
• About Dual Zone System
“Bass Center FRQ” Bass Center
40/50/60/70/80/100/
120/150 (Hz)
–8 — +8 (dB)
1.00/1.25/1.50/2.00
OFF/ON
Main source and sub source (Auxiliary input) output Front
channel and Rear channel separately.
- When “2Zone” is set to “ON”, the main source sound and
AUX input sound are output to the front speakers and rear
speakers separately.
Frequency
Bass level
“Bass Level”
“Bass Q Factor” Bass Q Factor
“Bass EXT”
Bass Extend
- Set up the channel of sub source by “2Zone”.
- Select Main source by [SRC] button.
- Adjust the volume of Front channel by Control knob.
- Adjust the volume of Rear channel by “2Zone Rear
Volume”.
- The Audio Control has no effect on sub source.
- When Bluetooth audio source is selected, set “2Zone F/R
Select” to “Rear”. “2Zone” cannot be turned “ON” when this
is set to “Front”. While “2Zone” is turned “ON”, “2Zone F/R
Select” function is disabled.
“Middle Adjust”
“Middle Center
FRQ”
“Middle Level”
Middle Center
Frequency
Middle level
0.5/1.0/1.5/2.0 (kHz)
–8 — +8 (dB)
1.00/2.00
“Middle Q Factor” Middle Q Factor
“Treble Adjust”
“Treble Center FRQ” Treble Center
Frequency
“Treble Level”
“Balance”
“Fader”
“2Zone Rear Volume” Rear volume during 0 — 35
Dual zone
“SubWoofer Level”
“Detailed Settings”
“HPF Front”
10.0/12.5/15.0/17.5 kHz
Treble level
Balance
Fader
–8 — +8 (dB)
Left 15 — Right 15
Rear 15 — Front 15
1 Select the source to adjust
Press the [SRC] button.
For how to select source item, refer to <Power and
source selection> (page 5).
Subwoofer level
–15 — +15 (dB)
2 Enter Audio Control mode
KDC-U6046 KDC-U6046L
Front High Pass
Filter
Rear High Pass Filter Through/40/60/80/100/
120/150/180/220 (Hz)
Through/40/60/80/100/
120/150/180/220 (Hz)
Press the [AUDIO] button.
KDC-U7046BT KDC-U7046BTL
“HPF Rear”
1) Press the [FNC] button.
2) Turn the Control knob to select “Audio
Control”, and then press the [ENTER] button.
“LPF SubWoofer” Low Pass Filter
50/60/80/100/120/
Through (Hz)
“Subwoofer Phase” Subwoofer Phase Reverse (180°)/
Normal (0°)
“2Zone”
“2Zone F/R Select” Dual Zone output Rear/Front
channel
“Supreme”
3 Select the Audio item to adjust
Turn the Control knob to select the audio item
for adjustment and then press the [ENTER]
button.
Dual Zone System ON/OFF
Supreme setting ON/OFF
Press the [
item.
] button to return to the previous
“Audio Preset”
Audio Preset
Recall/Memory
memoy†
“Volume Offset
ADJ”
Volume offset
–8 — 0 (dB)
(AUX: -8 — +8)
4 Adjust the Audio item
Turn the Control knob.
†Refer to <Audio Preset Memory> (page 8), <Audio Preset
Recall> (page 8)
5 Determine the setting value
Press the [ENTER] button.
The previous item is displayed.
⁄
•
‡“User”: The customized Bass, Middle, and Treble levels are
effective.
• You can set Bass, Middle, and Treble for each source.
6 Exit Audio Control mode
Press the [
] button for at least 1 second.
English
|
7
Audio Adjustments
Audio Preset Memory
Audio Preset Recall
Registering the value setup by Audio Control.
Recalling the sound setup registered by <Audio
Preset Memory> (page 8).
1 Setup Audio Control
Setup the <Audio Control> (page 7).
1 Select the source
Press the [SRC] button.
For how to select source item, refer to <Power and
source selection> (page 5).
2 Enter Audio Control mode
KDC-U6046 KDC-U6046L
Press the [AUDIO] button.
KDC-U7046BT KDC-U7046BTL
2 Enter Audio Control mode
KDC-U6046 KDC-U6046L
1) Press the [FNC] button.
2) Turn the Control knob to select “Audio
Control”, and then press the [ENTER] button.
Press the [AUDIO] button.
KDC-U7046BT KDC-U7046BTL
1) Press the [FNC] button.
2) Turn the Control knob to select “Audio
Control”, and then press the [ENTER] button.
3 Select Audio preset memory mode
The item can be selected and determined as
follows.
“Detailed Settings” ➜“Audio Preset”
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
3 Select Audio preset memory mode
The item can be selected and determined as
follows.
“Detailed Settings” ➜“Audio Preset”
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
4 Select the Audio Preset Memory
Turn the Control knob to select “Memory”, and
then press the [ENTER] button.
4 Select the Audio Preset Recall
Turn the Control knob to select “Recall”, and
then press the [ENTER] button.
5 Turn the Control knob to select “YES”, and then
press the [ENTER] button.
“Memory Completed” is displayed.
5 Turn the Control knob to select “YES”, and then
press the [ENTER] button.
“Recall Completed” is displayed.
6 Exit Audio Control mode
Press the [
] button for at least 1 second.
⁄
6 Exit Audio Control mode
Press the [ ] button for at least 1 second.
• To use this function, this unit must be powered for more
than one hour.
• Register 1 pair of Audio Preset Memory. You cannot register
by the source.
• When you press the Reset, all the sources will be the setting
value which is registered.
• The following items can be registered.
“Bass Center FRQ”, “Bass Level”, “Bass Q Factor”, “Bass EXT”,
“Middle Center FRQ”, “Middle Level”, “Middle Q Factor”,
“Treble Center FRQ”, “Treble Level”, “SubWoofer Level”, “HPF
Front”, “HPF Rear”, “LPF SubWoofer”, “Subwoofer Phase”
|
8
KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L
Music disc/Audio file Operation
Function of Audio file/ Internal CD source
⁄
Music Search
• If no characters included in a song name can be displayed,
the browse item name and digits are displayed.
Selecting the music you want to listen to from the
device or media being played now.
Items
Playlists
Artists
Albums
Songs
Display
“PLIST***” Podcasts
“ART***”
“ALB***”
“PRGM***”
Items
Display
“PDCT***”
“GEN***”
“COM***”
Genres
Composers
1 Enter Music Search mode
Press the [ ] button.
“MUSICSEARCH” is displayed.
2 Search for music
Function of iPod source
Audio file
Operation type
Movement between
folders/files
Selection of folder/flie Press the [ENTER].
Return to previous folder Press the [ ] button.
Operation
Turn the Control knob.
Alphabet Search
You can select an alphabetic character from the
list in the browse item (artist, album, etc.) currently
selected.
Return to root folder
Push the Control knob towards left for at
least 1 second.
1 Enter Music Search mode
Press the [ ] button.
“MUSICSEARCH” is displayed.
Cancel the Music Search Press the [ ] button for at least 1 second.
mode
2 Select browse item
Turn the Control knob to select browse item,
and then press the [ENTER] button.
¡ indicator: Audio file
] indicator: Folder with a folder or file in the lower
layer
^ indicator: Folder without a folder or file in the
lower layer
3 Enter Search select mode
Press the [ ] button.
CD source
Operation type
Movement between track Turn the Control knob.
Selection of track
4 Select Alphabet Search mode
Turn the Control knob to select “Alphabet
Search”, and then press the [ENTER] button.
Operation
Press the [ENTER].
Return to first track
Push the Control knob towards left for at
least 1 second.
5 Select the character to be searched for
Operation type
Operation
Cancel the Music Search Press the [ ] button.
mode
Select the characters
Turn the Control knob.
Move the cursor to the enter Push the Control knob towards up or
character position down.
Function of iPod source
6 Determine the selected character
Press the [ENTER] button.
Start search. When search is completed, the music
search mode is selected again at the selected
character position.
Music Search for iPod
Searching for the song (in iPod) you want to play.
1 Enter Music Search mode
Press the [ ] button.
Cancelling the Music Search mode
“MUSICSEARCH” is displayed.
Press the [
] button for at least 1 second.
2 Search for music
Operation type
⁄
Operation
• The time of Alphabet search may become long depending
on the number of items (songs) in iPod.
• To search for a character other than A to Z and 1 to 9, enter
“*”.
• If the first character string begins with an article “a”, “an”,
or “the” in the alphabet search mode, it is searched for in
defiance of the article.
Movement between items Turn the Control knob.
Selection of item
Press the [ENTER].
Return to previous item
Return to Top menu
Press the [ ] button.
Push the Control knob towards up for at
least 1 second.
Cancelling the Music Search mode
Press the [ ] button for at least 1 second.
English
|
9
Music disc/Audio file Operation
Function of iPod source/ Music Editor media
Display
Browses item
Skip Search
Playlists
The number of songs to be skipped is determined
by the ratio of the total number of songs in the list
which is selected.
Artists
Albums
Songs
1 Enter Music Search mode
Press the [ ] button.
“MUSICSEARCH” is displayed.
Podcasts
Genres
2 Enter Search select mode
Press the [ ] button.
Composers
5 Select the character to be searched for
Turn the Control knob to select character, and
then press the [ENTER] button.
3 Select Skip Search mode
Turn the Control knob to select “Skip Search”,
and then press the [ENTER] button.
You can select up to three characters.
4 Search for music
6 Search for music
Operation type
Operation
Turn the Control knob to select ”DONE”, and
then press the [ENTER] button.
A search result list is displayed.
Movement between items Turn the Control knob.
Skip Search
Selection of item
Push the Control knob towards up or down.
Press the [ENTER].
Return to previous item Press the [ ] button.
7 Select the music
Turn the Control knob to select music, and then
press the [ENTER] button.
Cancelling the Music Search mode
Press the [
] button for at least 1 second.
Cancelling the Music Search mode
⁄
Press the [
] button for at least 1 second.
• Set the ratio with 25 Skip Search in <Function setting>
(page 15).
• Keep pushing Control knob for 3 seconds or longer skips
songs at 10% regardless of the setting.
Function of iPod source
Related Search
Browsing for music of the same artist or genre as
the one being played.
Function of iPod source
Direct Search
1 Enter Music Search mode
Press the [ ] button.
“MUSICSEARCH” is displayed.
Searching for music by selecting a browse item and
an alphabetic character(s).
2 Enter Search select mode
Press the [ ] button.
1 Enter Music Search mode
Press the [ ] button.
“MUSICSEARCH” is displayed.
3 Select Related Search mode
Turn the Control knob to select “Related
Search”, and then press the [ENTER] button.
2 Enter Search select mode
Press the [ ] button.
4 Select browsing item
3 Select Direct Search mode
Turn the Control knob and press the [ENTER]
button when the desired browse item is
selected.
Turn the Control knob to select “Direct Search”,
and then press the [ENTER] button.
4 Select browse item
Turn the Control knob to select browse item,
and then press the [ENTER] button.
|
10 KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L
• Do not register Podcasts. Songs may be registered or played
improperly. For example, unintended songs are registered.
Display
“Search Artist”
“Search Album”
Browses music
Displays the album of the same artist.
Displays music in the album in which the one
being played is included.
Playing the playlist
1 Display the playlist
Press the [ENTER] button.
“My Playlist” is displayed.
“Search Genre”
Displays the artist of the same genre.
“Search Composer” Displays the album including music created by the
same composer.
2 Play a song in the playlist
5 Search for music
Operation type
Turn the Control knob to select the song you
want to play and then press the [ENTER] button.
“LIST” indicator is displayed.
Operation
Movement between items Turn the Control knob.
Selection of item
Return to previous item
Press the [ENTER] button.
Push the Control knob towards up.
⁄
• To stop playing the song in the playlist, turn the power off.
• If a song does not end with 1 second or longer silence, its
last portion may not be played.
• Songs cannot be played at random during playback of the
songs in playlist.
Cancelling the Related Search
Press the [ ] button for at least 1 second.
⁄
Deleting a song from the playlist
• Related search cannot be performed while playing a
Podcast.
1 Display the playlist
Press the [ENTER] button.
“My Playlist” is displayed.
• When the music being played has no information on
browsing items or no music was found, “Not Found” is
displayed.
2 Turn the Control knob to select the song you
want to delete and then press the [ENTER]
button for at least 2 seconds.
Function of iPod source
3 Turn the Control knob to select “One” or “All”,
and then press the [ENTER] button.
Selecting “All” deletes all songs.
My Playlist for iPod
You can register your favorite songs to make a
playlist. You can register up to ten songs in the
playlist.
4 Turn the Control knob to select “YES”, and then
press the [ENTER] button.
“Completed” is displayed.
Registering a song in the playlist
⁄
1 Play the song you want to register
Push the Control knob towards up, down, right,
and left.
• All songs in the playlist can also be deleted by selecting
26 My Playlist Delete of <Function setting> (page 15).
2 Register the song
Press the [ENTER] button for at least 2 seconds.
“## (registration number) Stored” is displayed. You
can register up to ten songs.
⁄
• When creating a playlist, you can register the songs stored
in one iPod. If you attempt to register a song by connecting
an unregistered iPod, “My Playlist Delete” is displayed.
Selecting “YES” deletes the playlist.
• The song displayed during music search can be registered
in the same manner. For the music search procedure, refer
to <Music Search for iPod> (page 9).
• If you attempt to register the eleventh song, “Memory Full”
is displayed and you cannot register the song. To register it,
delete an unnecessary song.
English
|
11
Music disc/Audio file Operation
Function of remote control
Function of disc changers
Basic Operation of Disc Changer
(Optional)
Direct Music Search
Searching the music by entering the track number.
Selecting CD changer source
Press the [SRC] button.
Select the “CD CH” display.
1 Enter Direct Music Search mode
Press the [DIRECT] button on the remote
control.
For how to select source item, refer to <Power and
source selection> (page 5).
“– –” is displayed.
2 Enter the music number
Press the number buttons on the remote
control.
Music search
Push the Control knob towards right or left.
Disc Search
Push the Control knob towards up or down.
3 Search the music
Press the [4] or [¢] button on the remote
control.
Cancelling Direct Music Search
Press the [
] button on the remote control.
Function of disc changers with remote control
Direct Search in Disc Changer
(Optional)
⁄
• Direct Music Search cannot be performed during playing
of iPod.
Searching the disc or music by entering the disc or
music number.
1 Enter Direct Search mode
Press the [DIRECT] button on the remote
control.
“– –” is displayed.
2 Enter the disc or music number
Press the number buttons on the remote
control.
3 Search the disc
Press the [FM] or [AM] button on the remote
control.
Search the music
Press the [4] or [¢] button on the remote
control.
Cancelling Direct Search
Press the [
] button on the remote control.
⁄
• Input “0” to select disc 10.
|
12 KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L
Tuner Operation
Function of remote control
Station Preset Memory
Direct Access Tuning
Putting a station in the memory.
Entering the frequency and tuning.
1 Select the frequency to put in the memory
Push the Control knob towards right or left.
1 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
2 Enter Preset Memory mode
Press the [ ] button.
“– – – –” is displayed.
3 Preset the station
2 Enter the frequency
Press the number buttons on the remote
control.
Example:
Turn the Control knob to select preset number
(“P1” – “P6”), and then press the [ENTER] button
for at least 2 seconds.
Cancelling the Preset Memory mode
Desired frequency Press button
Press the [
] button.
92.1 MHz (FM)
810 kHz (AM)
[9], [2], [1]
[8], [1], [0]
3 Search the frequency
Press the [4] or [¢] button on the remote
control.
Preset Tuning
Recalling the stations in the memory.
Cancelling Direct Music Search
1 Enter Preset Tuning mode
Press the [ ] button.
Press the [
] button on the remote control.
⁄
2 Recall the station
Turn the Control knob to select recall number
(“P1” – “P6”), and then press the [ENTER].
• You can enter the FM band frequency in steps of a
minimum of 0.1 MHz.
Cancelling Preset Tuning
Press the [
] button.
Frequency Step Setting
Changing the tuning frequency step.
The original setting is FM band 50 kHz, and AM
band 9 kHz.
1 Turn the power OFF
Press the [SRC] button for at least 1 second.
2 Switch the frequency step
While pressing the [FAVORITE] button and
[ENTER] button, press the [SRC] button.
Release your fingers from the button after the
display appears.
The frequency step changes to FM band 200 kHz,
and AM band 10 kHz.
⁄
• When the same operation is repeated, the frequency step
returns to the original setting.
• When the frequency step is changed, the frequencies in the
memory are deleted.
English
|
13
Favorite Control
Favorite Preset Memory
Favorite Preset Recall
You can register frequently used items such as
broadcast stations, iPod Playlist or Artists, Function
setting items, or Audio control items.
Retrieving an item registered to Favorite.
1 Enter Favorite Preset Recall mode
Press the [FAVORITE] button.
1 Display the item you want to register
2 Select the number to recall in the Favorite
memory
Turn the Control knob.
Registerable items are as follows:
Source
TUNER
Registerable items
Frequency
3 Recall the Favorite Preset
Press the [ENTER] button.
iPod
Browse item such as Playlists/Artists/Albums
Function setting item
Audio control item
Display control item
Telephone number retrieval.
Function setting
Audio control*
Display control*
Hands-free phone
Cancelling the Favorite Preset Recall mode
Press the [
] button.
* Function of KDC-U6046/ KDC-U6046L
(KDC-U7046BT/ KDC-U7046BTL, Audio control item and Display
control item are contained in Function setting.)
Deleting Favorite Preset Memory
When selecting registerable items, the “
indicator is lit for 5 seconds.
”
FAV
Deleting an item registered to Favorite.
Go through step 2 and later by the item which the
” indicator is lit.
1 Select Standby
“
FAV
Press the [SRC] button.
When a setting operation of each item can be
done in the Function setting, the “ ” indicator
Select the “STANDBY” display.
For how to select source item, refer to <Power and
source selection> (page 5).
FAV
goes out and you cannot register to the Favorite.
2 Enter Favorite Preset Memory mode
Press the [FAVORITE] button for at least 1
second.
2 Enter Function setting mode
Press the [FNC] button.
3 Select Favorite Delete mode
The item can be selected and determined as
follows.
3 Select the number to put in the memory
Turn the Control knob.
“Initial Settings” ➜“Favorite Delete”
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
4 Put the Favorite Preset in the memory
Press the [ENTER] button.
Cancelling the Favorite Preset Memory mode
4 Select the number you want to delete
Turn the Control knob to select memory
number, and then press the [ENTER] button.
“Favorite Delete” is displayed.
Press the [
] button.
⁄
• Register 6 pairs of Favorite Preset Memory.
“Register your favorite functions” is displayed for numbers
available for preset.
Select “All” if you want to delete all.
5 Turn the Control knob to select “YES”, and then
press the [ENTER] button.
“Completed” is displayed.
• The memory cannot be erased by the Reset button.
• Registering the operation procedure to an existing preset
number overwrites the existing procedure.
• The registered item can be deleted by selecting 36 Favorite
Delete of <Function setting> (page 15).
6 Exit Function setting mode
Press the [
] button for at least 1 second.
• If the items in the second or lower hierarchy are changed,
the list in iPod will be changed by adding or deleting
songs after the FAVORITE registration. Due to this, the list
registered in this unit will be different from the list in iPod.
The FAVORITE registration should be performed again after
editing the items in iPod.
• To use this function, this unit must be powered for more
than one hour.
|
14 KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L
Function setting
Configure the functions of this unit using the
following procedure:
02 Scan play: “Track Scan” (CD)/ “File Scan”(Audio
file) ➤ “ON”, “OFF”
When set to “ON”, plays the intro of the music in
the disc/folder successively.
03 Random play: “Disc Random” (CD)/ “Folder
Random” (Audio file/ iPod) ➤ “ON”, “OFF”
When set to “ON”, plays the music in the disc/
folder randomly.
1 Search for the item to set
Pick up the item to set according to <Function
item> (page 15).
2 Select the source
Press the [SRC] button.
04 All Random play: “All Random” ➤ “ON”, “OFF”
When set to “ON”, all songs in iPod are played at
random.
05 Track/File Repeat play: “Track Repeat” (CD)/
“File Repeat” (Audio file/ iPod) ➤ “ON”, ”OFF”
When set to “ON”, plays the music repeatedly.
06 Disc/Folder Repeat: “Disc Repeat” (CD
changer)/ “Folder Repeat” (Audio file) ➤ “ON”,
”OFF”
Switch to the source that displays the item to set
according to <Function list> (page 19).
For how to select source item, refer to <Power and
source selection> (page 5).
3 Enter Function setting mode
Press the [FNC] button.
4 Select the Function item
Turn the Control knob to select the item to set.
When set to “ON”, plays the music in the disc/
folder repeatedly.
07 Magazine Random: “MGZN Random” ➤ “ON”,
”OFF”
5 Enter the selected Function item
Press the [ENTER] button.
Press the [
item.
] button to return to the previous
When set to “ON”, plays the music in the disc
changer randomly.
Repeat steps 4 and 5 until you get to the item to
set.
6 Set the Function item
Turn the Control knob to select a desired
setting value.
Display Control
08 Display Type Selection: “Display Control” ➤ 5
types
7 Determine the setting value
Press the [ENTER] button.
The previous item is displayed.
Sets the display pattern.
Display type
Type A
Type B
Type C
Display information
Displays 2 lines of text.
Displays a line of text.
Displays the status.
8 Exit Function setting mode
Press the [
] button for at least 1 second.
Type D
Displays the clock.
Type E
Displays the spectrum analyzer.
Function item
Refer to <Selecting Display Type> (page 20).
09 Display Side Selection: “DISP Side Select” ➤
2 types
Sets the Type A, B, D, and E side display to ON/
OFF. Refer to <Selecting Display Type> (page 20).
10 Display Text Selection: “DISP Text Select”
Sets the Type A and B text display. Refer to
<Selecting Text Display> (page 20).
Example:
No. Function name: “Display of each function on
this unit” ➤ “Setting value 1”*, “Setting value 2”...
Provides a functional overview of the function
item. The source that displays this function can be
found according to the numbers (00) in <Function
list> (page 19).
11 Display Graphic Selection: “DISP GRPHC Select”
➤ 6 types
⁄
• The underscored setting value is a factory setting.
Sets the Type E spectrum analyzer display. Refer to
<Selecting Display Type> (page 20).
Music Play Mode
01 iPod Control by Hand: “Hands Mode” ➤ “ON”,
“OFF”
When set to “ON”, allows you to operate iPod with
the control on the iPod.
English
|
15
Function setting
Clock & Date Settings
Tuner Settings
12 Adjusting the Clock: “Clock Adjust”
Sets the clock. Refer to <Adjusting the Clock &
Date> (page 4).
22 Seek Mode: “Seek Mode” ➤ “Auto1”, ”Auto2”,
”Manual”
Selects the tuning mode of the radio.
13 Adjusting the Date: “Date Adjust”
Sets the date. Refer to <Adjusting the Clock &
Date> (page 4).
14 Selecting Date Mode: “Date Mode” ➤ 7 types
Sets the date display mode. Refer to <Adjusting
the Clock & Date> (page 4).
Tuning mode
Auto seek
Display Operation
“Auto1” Automatic search for a station.
Preset station seek “Auto2” Search in order of the stations in
the Preset memory.
Manual
“Manual” Normal manual tuning control.
23 Auto Memory: “Auto Memory”
Memorizes six stations with good reception
automatically.
Display & Illumination Settings
15 Display ON/OFF: “DISP OFF Mode” ➤ “ON”,
“OFF”
Turn the Control knob to select “YES” and then
press the [ENTER] button to start the auto
memory operation.
If this unit is not operated at least 5 seconds with
“ON” selected, the display turns off. During a
setup mode, the display will not turn off even if 5
seconds lapse.
24 Monaural reception: “MONO” ➤ “ON”, ”OFF”
You can reduce the noise when stereo broadcasts
are received as monaural.
16 Display Dimmer: “Display Dimmer” ➤ “Auto”,
“Manual1”, “Manual2”, “OFF”
iPod Settings
Dims the display part in conjunction with the light
switch of the vehicle.
17 Text Scroll: “Text Scroll” ➤ “Auto”, ”Manual”
Setting to “Auto” scrolls the displayed text
automatically.
25 Skip Search: “Skip Search” ➤ “0.5%”, “1%”, “5%”,
“10%”
Sets the ratio of skip performed with <Skip
Search> (page 10).
26 My Playlist Delete: “My Playlist Delete”
Deletes the songs registered in My Playlist.
Turn the Control knob to select “YES” and then
press the [ENTER] button to delete My Playlist.
18 Display Bluetooth device Status: “BT DVC
Status”
You can display the connection status, signal
strength, and battery level.
: Battery level of cell-phone.
: Signal strength of cell-phone.
AUX Settings
Function of KDC-U7046BT/ KDC-U7046BTL/ KCA-
BT200 (Optional Accessory).
27 Name Set: “Name SET” ➤ “AUX”, “DVD”,
“PORTABLE”, “GAME”, “VIDEO”, “TV”
19 Illumination Dimmer: “ILLUMI Dimmer” ➤
“Auto”, “Manual1”, “Manual2”, “OFF”
Reduces the key Illumination brightness.
Auto: Dims the illumination in conjunction with
the Light switch of the vehicle.
Sets the display when switched to AUX source.
Audio Settings
28 Audio Control: “Audio Control”
Sets the sound quality and speaker system. Refer
to <Audio Control> (page 7).
Manual1: Dims the illumination constantly.
Manual2: Dims the illumination darker than
Manual1.
Function of the KDC-U7046BT/ KDC-U7046BTL.
OFF: Does not dim the illumination.
20 Illumination Effect: “ILLUMI Effect” ➤ “ON”,
”OFF”
Sets whether the key illumination color is
changed in conjunction with the key operation.
21 Music-linked Illumination Effect: “ILLUMI Music
SYNC” ➤ “ON”, ”OFF”
Initial Settings
29 Source Select Mode: “SRC Select” ➤ “1”, ”2”
Sets the source selection method.
30 Beep: “Key Beep” ➤ “ON”, “OFF”
Setting the operation check sound (beep sound)
ON/OFF.
Sets whether the key illumination color is
changed in conjunction with the sound volume.
|
16 KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L
31 Unremoved panel beep: “TDF Alarm” ➤ “ON”,
“OFF”
38 Speaker Select: “Speaker Select” ➤ “OFF”,
”5/4inch”, ”6x9/6inch”, ”O.E.M”
If you turn off the engine key of the vehicle
without removing the panel, a beep sounds for
30 seconds.
Fine-tuning so that the System Q value is optimal
when setting the speaker type as follows;
Speaker type
OFF
Display
“OFF”
32 Chinese language setting: “Chinese” ➤ “ON”,
“OFF”
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
“5/4inch”
“6x9/6inch”
“O.E.M”
When this is set to ON, the following character
strings are displayed in Chinese:
Folder name/ File name/ Song title/ Artist name/
Album name/ KCA-BT200 (optional accessory)
Function of the KDC-U7046BT/ KDC-U6046.
33 Language setting: “Language Select” ➤
”English”, “Arabic” ,”Persian”, “Thai”
39 Firmware Upgrade: “F/W Update #.##” ➤ “USB”,
”CD”
Upgrades the firmware.
Selecting “YES” and then pressing [ENTER] button
starts upgrading the firmware.
For how to update the firmware, access our web
site.
When this is set to “Arabic”, ”Persian”, or “Thai”, the
following character strings are displayed in Arabic,
Persian, or Thai:
Folder name/ File name/ Song title/ Artist name/
Album name/ KCA-BT200 (optional accessory)
Function of the KDC-U7046BTL/ KDC-U6046L.
34 Built in AUX: “Built-in AUX” ➤ “ON”, “OFF”
Sets whether to display AUX during source
selection.
Demo Mode Settings
40 Demo Mode: “DEMO Mode” ➤ “ON”, “OFF”
Specifies whether to enable demonstration.
Function of KDC-U7046BT/ KDC-U7046BTL/ KCA-
BT200 (Optional Accessory)
Bluetooth Settings
35 CD Read: “CD Read” ➤ “1”, ”2”
Sets the method for reading CD.
When unable to play special format CD, set this
function to “2” to force playing. Note that some
music CDs may be unplayable even when set to
“2”.
In addition, audio files cannot be played when set
to “2”. Normally, keep this set to “1”.
1 : Automatically distinguishes between audio file
disc and music CD when playing disc.
2 : Forces playing as music CD.
41 Phone Selection: “Phone Selection”
Select a cell-phone subject to hands-free
connection. Refer to <Selecting the Bluetooth
device You Wish to Connect> (page 28).
42 Audio Selection: “Audio Selection”
Select the Bluetooth audio player to be
connected. Refer to <Selecting the Bluetooth
device You Wish to Connect> (page 28).
43 SMS Download: “SMS Download”
Download a short message. Refer to
36 Favorite Delete: “Favorite Delete” ➤ Preset No.,
”All”
Deletes Favorite Preset Memory.
Refer to <Deleting Favorite Preset Memory>
(page 14).
<Downloading the SMS> (page 31).
44 SMS Inbox display: “SMS Inbox”
Display the received short message. Refer to
<Displaying the SMS> (page 31).
Function of KCA-BT200 (Optional Accessory).
45 Adding a voice command: “PB Name Edit”
Registers voice for voice recognition. Refer to
<Adding a voice dialing command> (page 29).
Function of KCA-BT200 (Optional Accessory).
46 Voice command category setting: “PN Type
Edit”
37 Built in Amp setting: “Built-in AMP” ➤ “ON”,
“OFF”
Selecting “OFF” turns off the built-in amplifier.
Turning off the built-in amplifier improves the
quality of the sound from Preout.
Registers voice to select the Phone number
category in Phonebook. Refer to <Setting a Voice
Command for Category> (page 30).
Function of KCA-BT200 (Optional Accessory).
English
|
17
Function setting
47 Device Regist: “Device Regist.”
Register a Bluetooth device (pairing). Refer to
<Registering Bluetooth device> (page 26).
48 Special Device Regist: “SPCL DVC Select”
Allow registration of a special device that cannot
be registered normally. Refer to <Registering
Special Bluetooth device> (page 26).
49 Device Delete: “Device Delete”
Cancel registration of the Bluetooth device. Refer
to <Deleting a Registered Bluetooth device>
(page 28).
50 PIN Code Edit: “PIN Code Edit”
Specify the PIN code required when registering
this unit using the Bluetooth device. Refer to
<Registering PIN Code> (page 27).
51 Setting the Time Interval for Automatic
Answer: “Auto Answer” ➤ ”OFF”, “0SEC” – “8SEC”
– “99SEC”
56 Noise Cancel: “NR Level” ➤ “-3” – ”0” – “+3”
Reduces the noises generated by surrounding
environment without changing the built-in
microphone volume. Adjust the voice of caller
when it is not clear. Setting to “+” increases the
noise reduction.
Function of the KDC-U7046BT/ KDC-U7046BTL.
57 Echo Cancel Level: “Echo Cancel” ➤ “-2” – ”0”
– “+2”
Sets the echo cancellation level.
Function of the KDC-U7046BT/ KDC-U7046BTL.
58 MIC Select: “MIC Select” ➤ “Builtin”, ”External”
Determines whether the built-in or external
microphone is to be used when the receiver
incorporates a microphone.
Builtin: Use the built-in microphone.
External: Use the external microphone.
Function of the KDC-U7046BT/ KDC-U7046BTL.
This function automatically answers (responds
to) a call after lapse of the preset time interval for
automatic answer.
“OFF” : Does not answer the phone call
automatically.
⁄
• The Bluetooth Function setting items can be set while in
the Bluetooth mode without selecting the Function setting
mode.
“0” : Automatically answers the phone call at once.
“1s” – “99s” : Automatically answers the phone call
after lapse of 1 – 99 seconds.
1. Press the [
] button ( KDC-U7046BT KDC-U7046BTL )/
[FNC] button for at least 1 second ( KDC-U6046
KDC-U6046L ) to enter the Bluetooth mode.
2. Turn the Control knob to select “BT Setting”, and then
press the [ENTER] button.
3. Turn the Control knob to select desired item, and then
press the [ENTER] button.
52 Speaker Select: “Bluetooth HF/Audio” ➤ “Front”,
”All”
You can specify output speakers for hands-free
voice communication and Bluetooth audio sound.
“Front” : Outputs sound from the front speakers.
“All” : Outputs sound from the front and rear
speakers.
4. Turn the Control knob to select value, and then press the
[ENTER] button.
53 Setting the Beep of the Incoming Call: “Call
Beep” ➤ “ON”, ”OFF”
You can output a beep from the speaker when a
call comes in.
“ON” : Beep is heard.
“OFF” : Beep is canceled.
54 BT F/W Update: “BT F/W Update”
Displays the firmware version and update the
firmware. Refer to <Displaying the Firmware
Version> (page 29).
55 MIC Gain: “MIC Gain” ➤ “-3” – ”0” – “+3”
Adjusts the sensitivity of the built-in microphone
for a telephone call. Adjust the voice of caller.
Setting to “+” increases the voice volume.
Function of the KDC-U7046BT/ KDC-U7046BTL
|
18 KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L
Function items that appear when the tuner
source is selected
Function list
Function items that appear when any
source is selected
Function item list
“Audio Control”
“Settings”
No.
28
Function item list
No.
12
13
14
15
16
17
18
19
20
21
08
09
10
11
40
22
“Seek Mode”
“Auto Memory”
“MONO”
“Settings”
“Clock & Date”
“Clock Adjust”
“Date Adjust”
“Date Mode”
“DISP OFF Mode”
“Display Dimmer”
“Text Scroll”
“BT DVC Status”
“ILLUMI Dimmer”
“ILLUMI Effect”
“ILLUMI Music SYNC”
23
24
“DISP & ILLUMI”
Function items that appear when the AUX
source is selected
Function item list
“Audio Control”
“Settings”
No.
28
27
“Name SET”
Function items that appear in the BT mode
“Display Control” (“DISP SELECT”)
“DEMO Mode”
“DISP Side Select”
“DISP Text Select”
“DISP GRPHC Select”
Function item list
No.
41
42
43
44
45
46
47
48
49
50
51
52
“Settings”
“Phone Selection”
“Audio Selection”
“SMS Download”
“SMS Inbox”
Function items that appear during standby
“Voice Tag”
“PB Name Edit”
“PN Type Edit”
“Device Regist.”
“SPCL DVC Select”
“Device Delete”
“PIN Code Edit”
“Auto Answer”
“Bluetooth HF/
Audio”
Function item list
“Initial Settings” “SRC Select”
“Key Beep”
No.
29
30
31
32
33
34
35
36
37
38
39
“Detailed Settings”
“TDF Alarm”
“Chinese”
“Language Select”
“Built-in AUX”
“CD Read”
“Favorite Delete”
“Built-in AMP”
“Speaker Select”
“F/W Update #.##”
53
54
55
56
57
58
“Call Beep”
“BT F/W Update”
“MIC Gain”
“NR Level”
“Echo Cancel”
“MIC Select”
Function items that appear during
playback of a CD, audio file, or iPod
Function item list
“Audio Control”
No.
28
01
“Play Mode”
“Hands Mode”(iPod)
02
“Track Scan”(CD)/“File Scan”(Audio file)
“Disc Random”(CD)/“Folder Random”(Audio
file/ iPod)
03
04
05
“All Random”(iPod)
“Track Repeat”(CD)/“File Repeat”(Audio file/
iPod)
06
“Disc Repeat”(CD changer)/“Folder Repeat”
(Audio file)
07
25
26
“MGZN Random”(Disc changer)
“Skip Search”(iPod/ Music Editor media)
“My Playlist Delete”(iPod)
“Settings”
English
|
19
Display Settings
Selecting Display Type
Shown below are examples of display types.
Display name Display Type
Selecting Text Display
Changes displayed information on each of the
following sources:
Type A
Type B
Type C
Type D
Type E
Displays 2 lines of text.
Displays a line of text.
Displays the status (ON/OFF indicator for each function).
Displays the clock.
Displays the spectrum analyzer.
In Tuner source
Information
Frequency
Spectrum analyzer & Clock
Display
“Frequency”
“Speana/Clock”
“Date”
Date
Displays the status (Type A display only)
Blank
“Indicator”
“Blank”
1 Enter Display control mode
KDC-U6046 KDC-U6046L
Press the [DISP] button.
KDC-U7046BT KDC-U7046BTL
In CD & External disc source
Information
Disc title
Display
1) Press the [FNC] button.
“Disc Title”
“Track Title”
“P-Time”
2) Turn the Control knob to select “Display
Control”, and then press the [ENTER] button.
Track title
Play time
Spectrum analyzer & Clock
Date
Displays the status (Type A display only)
Blank
“Speana/Clock”
“Date”
“Indicator”
“Blank”
2 Select Display type selection mode
Turn the Control knob to select Display type,
and then press the [ENTER] button.
3 Select the Display type
Turn the Control knob to select Display
information item, and then press the [ENTER]
button.
In Audio file/ iPod source
Information
Title & Artist name
Album & Artist name
Folder name
File name
Play time
Spectrum analyzer & Clock
Date
Display
“Title/Artist”
“Album/Artist”
“Folder Name”
“File Name”
“P-Time”
The following display information items can be set:
• Side display selection (When selecting Display
type A, B, D, or E.)
Select the “DISP Side Select” display.
Refer to 09 Display Side Selection of <Function
setting> (page 15).
“Speana/Clock”
“Date”
Displays the status (Type A display only)
Blank
“Indicator”
“Blank”
• Text display selection (When selecting Display
type A or B.)
Select the “DISP Text Select” display.
Refer to <Selecting Text Display> (page 20).
• Graphic selection (When selecting Display type
E.)
Select the “DISP GRPHC Select” display.
Refer to 11 Display Graphic Selection of <Function
setting> (page 15).
In Standby/ Auxiliary input source
Information
Display
Source name
Spectrum analyzer & Clock (AUX only)
Clock (Standby only)
“Source Name”
“Speana/Clock”
“Clock”
Date
“Date”
Displays the status (Type A display only)
Blank
“Indicator”
“Blank”
4 Exit Function setting mode
Press the [
] button for at least 1 second.
|
20 KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L
• If all characters cannot be displayed while playing with iPod,
the file number in the list is displayed.
In Bluetooth Audio “BT Audio” (KDC-U7046BT/
KDC-U7046BTL)/ “BT Audio EXT” (KCA-BT200;
Optional accessory) source
Information
Music title
Folder name
File name
Display
“TITLE***”
“FLD***”
“FILE***”
Information
Display
Source name
Title & Artist name
“Source Name”
“Title/Artist”
(KDC-U7046BT/ KDC-U7046BTL only)
Album & Artist name
(KDC-U7046BT/ KDC-U7046BTL only)
Spectrum analyzer & Clock
Date
“Album/Artist”
“Speana/Clock”
“Date”
Displays the status (Type A display only)
Blank
“Indicator”
“Blank”
1 Enter Display control mode
KDC-U6046 KDC-U6046L
Press the [DISP] button.
KDC-U7046BT KDC-U7046BTL
1) Press the [FNC] button.
2) Turn the Control knob to select “Display
Control”, and then press the [ENTER] button.
2 Select the Display type
Turn the Control knob to select Display type A
or B, and then press the [ENTER] button.
3 Select Text display selection mode
Turn the Control knob to select “DISP Text
Select”, and then press the [ENTER] button.
4 Select the text display part (Display type A
only)
Push the Control knob towards up or down.
The selected text display part blinks.
5 Select the text
Turn the Control knob.
6 Exit Function setting mode
Press the [
] button for at least 1 second.
⁄
• If the selected display item does not have any information,
alternative information is displayed.
• Some items cannot be selected depending on the display
type and row.
• When selecting “Folder name” while playing with iPod,
names will be displayed depending on currently selected
browsing items.
• If the iPod Control by Hand Mode is set to on while playing
the iPod, “iPod By Hand Mode” is displayed.
English
|
21
Function of KDC-U7046BT/ KDC-U7046BTL/ KCA-BT200 (Optional Accessory)
Operation of hands-free phoning
Before Use
• For details on the Bluetooth cell-phone with the
hands-free function, see <About the Cell-Phone>
(page 34).
• You need to register your cell-phone before using
it with this unit. For more details, see <Registering
Bluetooth device> (page 26).
4 Search for the name
Press the [ENTER] button.
5 Select the phone number
Turn the Control knob.
Pushing the Control knob towards right or left sorts
the Phone Book by name.
6 Make a call
• If you have registered two or more cell-phones,
you need to select one of them. For more details,
see <Selecting the Bluetooth device You Wish to
Connect> (page 28).
• To use the Phone Book, it must be downloaded to
this unit in advance. For details, see <Downloading
the Phone Book> (page 27).
KDC-U7046BT KDC-U7046BTL
Press the [ ] button.
KDC-U6046 KDC-U6046L
Press the [ENTER] button.
⁄
• The display changes in name, telephone number, and
time-stamp whenever pressing the [ENTER] button.
( KDC-U7046BT KDC-U7046BTL )
Receiving a call
• During search, a non-accent character such as “u” is
searched for instead of an accent character such as “ü”.
Answering a Phone Call
KDC-U7046BT KDC-U7046BTL
Press the [ ] button.
KDC-U6046 KDC-U6046L
Press the [ENTER] button.
Dialing a number
⁄
• The following operations disconnect the line:
- Insering a CD.
1 Enter Bluetooth mode
KDC-U7046BT KDC-U7046BTL
Press the [ ] button.
- Connecting a USB device.
• The name of the calling party is displayed if it has already
been registered in the Phone Book.
KDC-U6046 KDC-U6046L
Press the [FNC] button for at least 1 second.
“BT MODE” is displayed.
Rejecting an Incoming Call
KDC-U7046BT KDC-U7046BTL
2 Select the Number dial mode
Turn the Control knob to select “Number Dial”,
and then press the [ENTER] button.
Press the [
KDC-U6046 KDC-U6046L
] button.
Press the [SRC] button.
3 Enter a phone number
Calling a number in the Phone Book
Turn the Control knob to select number, and
then Push the Control knob towards right.
1 Enter Bluetooth mode
KDC-U7046BT KDC-U7046BTL
Press the [ ] button.
4 Make a call
KDC-U7046BT KDC-U7046BTL
Press the [ ] button.
KDC-U6046 KDC-U6046L
Press the [ENTER] button.
KDC-U6046 KDC-U6046L
Press the [FNC] button for at least 1 second.
“BT MODE” is displayed.
To erase the entered phone number digit by
digit:
Push the Control knob towards left.
2 Select the Name search mode
Turn the Control knob to select “Name Search”,
and then press the [ENTER] button.
⁄
3 Enter the initial of name
• You can input a maximum of 32 digits.
Operation type
Operation
Select the characters.
Move the character page.
Turn the Control knob.
Push the Control knob towards up or
down.
|
22 KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L
KDC-U6046 KDC-U6046L
Calling a number in the call log
Press the [ENTER] button.
1 Enter Bluetooth mode
KDC-U7046BT KDC-U7046BTL
Press the [ ] button.
⁄
• You need to register the preset dial number. Refer to
<Registering to the Preset Dial Number List> (page 23).
KDC-U6046 KDC-U6046L
Press the [FNC] button for at least 1 second.
“BT MODE” is displayed.
Registering to the Preset Dial Number
List
2 Select the call log mode
Turn the Control knob to select “Incoming
Calls”, “Outgoing Calls”, or “Missed Calls”, and
then press the [ENTER] button.
“Incoming Calls”: Incoming calls
1 Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dialing a number/ Calling a number in the call log/
Calling a number in the Phone Book
“Outgoing Calls”: Outgoing calls
“Missed Calls”: Missed calls
3 Select a name or phone number
Turn the Control knob.
2 Enter Preset Memory mode
Press the [ ] button.
4 Make a call
3 Select a number and store it in the memory
Turn the Control knob to select memory
number (“P1” – “P6”), and then press the
[ENTER] button for at least 2 second.
KDC-U7046BT KDC-U7046BTL
Press the [ ] button.
KDC-U6046 KDC-U6046L
Press the [ENTER] button.
Cancelling the Preset Memory mode
⁄
Press the [
] button.
• The display changes in name, telephone number, and
time-stamp whenever pressing the [ENTER] button.
( KDC-U7046BT KDC-U7046BTL )
• The outgoing call list, the incoming call list, and the missed
call list, are the lists of calls originated from and received
at this unit. They are not the ones stored in the cell-phone
memory.
During a call
Disconnecting a Call
Press the [SRC] button.
Switching to the Private Mode
Push the Control knob towards right or left.
Switches between Private talk (“PRIVATE”) and
Hands-free talk each time this button is pressed.
Speed dialing (Preset dial)
1 Enter Bluetooth mode
KDC-U7046BT KDC-U7046BTL
Press the [ ] button.
⁄
• Depending on the type of your cell-phone, switching
to the private talk mode may select the source that was
used before commencing the hands-free connection. If
this happens, the source cannot be switched back to the
hands-free talk mode by operating this unit. Operate your
cell-phone to return to the hands-free talk mode.
KDC-U6046 KDC-U6046L
Press the [FNC] button for at least 1 second.
“BT MODE” is displayed.
2 Select the number you want to recall from the
memory
Turn the Control knob to select recall number
(“P1” – “P6”), and then press the [ENTER]
button.
Adjusting the Voice Volume during a Call
Turn the Control knob.
3 Make a call
KDC-U7046BT KDC-U7046BTL
Press the [ ] button.
English
|
23
Function of KDC-U7046BT/ KDC-U7046BTL/ KCA-BT200 (Optional Accessory)
Operation of hands-free phoning
Function of KCA-BT200 (Optional Accessory)
Call waiting
Making a voice dialing call
Answering Another Incoming Call with the
Current Call Suspended
1 Enter Bluetooth mode
Press the [FNC] button for at least 1 second.
“BT MODE” is displayed.
KDC-U7046BT KDC-U7046BTL
Press the [ ] button.
KDC-U6046 KDC-U6046L
2 Enter voice recognize mode
1) Press the [FNC] button for at least 1 second.
2) Turn the Control knob to select “Answer”, and
then press the [ENTER] button.
Press the [AUDIO] button for at least 1 second.
3 Have the unit recognize your spoken name
Press the [ENTER] button. If you hear a beep,
speak a registered name within 2 seconds.
Answering another Incoming Call after
Terminating the Current Call
Press the [SRC] button.
4 Have the unit recognize the spoken category
When you hear a beep, speak the category
within 2 seconds.
The recognized phone number (name) is displayed.
When you want to change the displayed phone
number (name), press the [DISP] button.
Continuing the Current Call
KDC-U7046BT KDC-U7046BTL
Press the [
] button.
KDC-U6046 KDC-U6046L
1) Press the [ENTER] button.
5 Make a call
Press the [ENTER] button.
2) Turn the Control knob to select “Reject”, and
then press the [ENTER] button.
⁄
Answering the Waiting Call after Terminating
the Current Call
• If your voice cannot be recognized, a message is displayed.
Refer to <Troubleshooting Guide> (page 36).
Pressing the [ENTER] button allows you to retry voice input.
• Both the name and category requires registration of a voice
tag. Refer to <Setting a Voice Command for Category>
(page 30).
Press the [SRC] button.
Switching between the Current Call and Waiting
Call
KDC-U7046BT KDC-U7046BTL
Press the [ ] button.
KDC-U6046 KDC-U6046L
Press the [ENTER] button.
Each pressing of this knob switches the calling
party.
Displays of phone number type
(category)
The category items in the Phone Book are displayed
as follows:
Display
Information
“General”/“
”
General
Clearing the Disconnection Message
“Home”/“
“Office”/“
“Mobile”/“
“Other”/“
”
Home
Office
Mobile
Other
KDC-U7046BT KDC-U7046BTL
Press the [ ] button.
KDC-U6046 KDC-U6046L
”
”
Press the [FNC] button for at least 1 second.
”
“HF Disconnect” disappears.
|
24 KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L
Function of KDC-U7046BT/ KDC-U7046BTL/ KCA-BT200 (Optional Accessory)
Bluetooth Audio Operation
Before Use
• For details on the Bluetooth Audio player which
can be connected, see <About the Bluetooth Audio
player> (page 34).
• You need to register your Bluetooth Audio player
before using it with this unit. For more details, see
<Registering Bluetooth device> (page 26).
• You need to select the Bluetooth audio player you
wish to connect. Refer to <Selecting the Bluetooth
device You Wish to Connect> (page 28).
Basic Operation
Selecting Bluetooth Audio source
Press the [SRC] button.
Select the “BT AUDIO” ( KDC-U7046BT
KDC-U7046BTL )/ “BT AUDIO EXT” ( KDC-U6046
KDC-U6046L ) display.
For how to select source item, refer to <Power and
source selection> (page 5).
Pause and play
Press the [
] button.
Music Search
Push the Control knob towards right or left.
⁄
• All or some of the operations above cannot be performed if
the Bluetooth audio player is not ready for remote control.
• Switching between Bluetooth audio sources does not start
or stop playback automatically. Perform the operation for
starting or stopping playback.
• Some audio players cannot be controlled remotely or
reconnected after Bluetooth disconnection. Operate the
main unit of the audio player to connect Bluetooth.
• When “2Zone” is set to “ON” and “2Zone F/R Select” is set to
“Front” of <Audio Control> (page 7), Bluetooth Audio source
cannot be selected.
English
|
25
Function of KDC-U7046BT/ KDC-U7046BTL/ KCA-BT200 (Optional Accessory)
Bluetooth Setup
KDC-U6046 KDC-U6046L
Registering Bluetooth device
Input the PIN code (steps 5 and 6).
To make your Bluetooth device (cell-phone) usable
with this unit, you need to register it (pairing). You
can register up to five Bluetooth devices to this unit.
5 Input the PIN code
Operation type
Operation
Select the numbers.
Move to the next digit.
Delete the last digit.
Turn the Control knob.
Push the Control knob towards right.
Push the Control knob towards left.
When registering from Bluetooth devices
1 Turn on the this unit.
2 Start registering a unit by operating the
Bluetooth device
By operating the Bluetooth device, register the
hands-free unit (pairing). Select “KENWOOD
BT CD/R-4P1” or “KCA-BT200” from the list of
connected units.
6 Transmit the PIN code
Press the [ENTER] button.
If “Pairing Success” is displayed, registration is
complete.
7 Return to the device list
Press the [ENTER] button.
3 Enter a PIN code
Input the PIN code registered as mentioned in
<Registering PIN Code> (page 27).
Check that registration is complete on the
Bluetooth device.
8 Exit Bluetooth mode
Press the [SRC] button.
⁄
• This unit allows up to eight digits to be input for a PIN code.
If a PIN code cannot be input from this unit, it can be input
from the Bluetooth device.
4 By operating the Bluetooth device, start hands-
free connection.
• If there are 5 or more Bluetooth devices registered, you
cannot register a new Bluetooth device.
When registering from this unit
• If the error message appears even though the PIN code is
correct, try <Registering Special Bluetooth device> (page 26).
1 Enter Bluetooth mode
KDC-U7046BT KDC-U7046BTL
Press the [ ] button.
KDC-U6046 KDC-U6046L
Press the [FNC] button for at least 1 second.
“BT MODE” is displayed.
Registering Special Bluetooth device
Allow registration of a special device that cannot be
registered normally (pairing).
2 Enter Function setting mode
Press the [FNC] button.
1 Enter Bluetooth mode
KDC-U7046BT KDC-U7046BTL
Press the [ ] button.
3 Select Bluetooth device registration mode
The item can be selected and determined as
follows.
KDC-U6046 KDC-U6046L
”Settings” ➜“Detailed Settings” ➜“Device
Regist.”
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
Search for the Bluetooth device.
Press the [FNC] button for at least 1 second.
“BT MODE” is displayed.
2 Enter Function setting mode
Press the [FNC] button.
When search is completed, “Finished” is displayed.
3 Select Special device registration mode
The item can be selected and determined as
follows.
”Settings” ➜“Detailed Settings” ➜“SPCL DVC
Select”
4 Select the Bluetooth device
Turn the Control knob to select desired
Bluetooth device, and then press the [ENTER]
button.
KDC-U7046BT KDC-U7046BTL
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
When “Paring Success” is displayed, PIN code input
(steps 5 and 6) is not required. When “Pin Code NG”
is displayed, press the [ENTER] button. Then enter
the PIN code (steps 5 and 6).
4 Select a device name
Turn the Control knob to select desired device
|
26 KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L
name, and then press the [ENTER] button.
If “Completed” is displayed, registration is
completed.
Downloading the Phone Book
Download the phone book data from the cell-
phone to this unit so that you can use the Phone
Book of this unit.
5 Go through the procedure of <Registering
Bluetooth device> (page 26) and complete the
registration (pairing).
Downloading automatically
If the cell-phone supports a phone book
synchronization function, the phone book is
downloaded automatically after Bluetooth
connection.
Cancelling Bluetooth mode
Press the [SRC] button.
⁄
• If the device name is not in the list, select “Other Phones”.
⁄
• Setting on the cell-phone may be required.
• If no phone book data is found in the unit even after
“Completed” is displayed, your cell-phone may not support
automatic download of phone book data. In this case, try
downloading manually.
Registering PIN Code
By operating the Bluetooth device, specify the PIN
code necessary for registering this unit.
Downloading from the cell-phone manually
1 Operate the cell-phone to end the hands-free
1 Enter Bluetooth mode
KDC-U7046BT KDC-U7046BTL
Press the [ ] button.
connection.
2 Operate the cell-phone to send the phone
book data to this unit
By operating the cell-phone, download the phone
book data to this unit.
KDC-U6046 KDC-U6046L
Press the [FNC] button for at least 1 second.
“BT MODE” is displayed.
• During downloading:
“Downloading” is displayed.
2 Enter Function setting mode
Press the [FNC] button.
• After completion of downloading:
“Completed” is displayed.
3 Select PIN code edit mode
The item can be selected and determined as
follows.
”Settings” ➜“Detailed Settings” ➜“PIN Code
Edit”
3 Operate the cell-phone to start the hand-sfree
connection.
Clearing the downloading completion message
Press any button.
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
⁄
4 Input the PIN code
• Up to 1000 phone numbers can be registered for each
registered cell-phone.
Operation type
Operation
• Up to 32 digits can be registered for each phone number
along with up to 50* characters representing a name.
(* 50: Number of alphabetic alphabetical characters.
Fewer characters can be input depending on the type of
characters.)
Select the numbers.
Move to the next digit.
Delete the last digit.
Turn the Control knob.
Push the Control knob towards right.
Push the Control knob towards left.
5 Register a PIN code
Press the [ENTER] button.
If “Completed” is displayed, registration is complete.
• To cancel downloading of the phone book data, operate
the cell-phone.
6 Exit Bluetooth mode
Press the [SRC] button.
⁄
• By default, “0000” is specified.
• A PIN code can be specified with up to eight digits.
English
|
27
Function of KDC-U7046BT/ KDC-U7046BTL/ KCA-BT200 (Optional Accessory)
Bluetooth Setup
Selecting the Bluetooth device You
Wish to Connect
Deleting a Registered Bluetooth
device
When two or more Bluetooth devices have already
been registered, you need to select the Bluetooth
device you wish to use.
You can delete a registered Bluetooth device.
1 Enter Bluetooth mode
KDC-U7046BT KDC-U7046BTL
Press the [ ] button.
1 Enter Bluetooth mode
KDC-U7046BT KDC-U7046BTL
Press the [ ] button.
KDC-U6046 KDC-U6046L
Press the [FNC] button for at least 1 second.
“BT MODE” is displayed.
KDC-U6046 KDC-U6046L
Press the [FNC] button for at least 1 second.
“BT MODE” is displayed.
2 Enter Function setting mode
Press the [FNC] button.
2 Enter Function setting mode
3 Select Bluetooth device deletion mode
The item can be selected and determined as
follows.
”Settings” ➜“Detailed Settings” ➜“Device
Delete”
Press the [FNC] button.
3 Select Bluetooth device selection mode
The item can be selected and determined as
follows.
”Settings” ➜“Phone Selection” (to select the
cellphone) or “Audio Selection” (to select the
audio player)
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
Device name is displayed.
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
“(name)” is displayed.
4 Delete the selected Bluetooth device
Turn the Control knob to select desired device
name, and then press the [ENTER] button.
4 Select the Bluetooth device
Turn the Control knob.
5 Turn the Control knob to select “YES”, and then
press the [ENTER] button.
“Completed” is displayed.
5 Set up the Bluetooth device
Press the [ENTER] button.
6 Exit Bluetooth mode
Press the [SRC] button.
‘✱(name)’ or ‘-(name)’ is displayed.
“✱”: The selected Bluetooth device is busy.
“-”: The selected Bluetooth device is on standby.
“ “ (blank): The Bluetooth device is deselected.
⁄
• When a registered cell-phone is deleted, its Phone Book,
log, SMS, and voice tag are also deleted.
6 Exit Bluetooth mode
Press the [SRC] button.
⁄
• If a cell-phone is already selected, deselect it, and then
select a different one.
• If you cannot select a device using the audio player,
connect the device with the audio player.
|
28 KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L
Displaying the Firmware Version
5 Select a mode
Turn the Control knob.
Display the version of the firmware of this unit.
Display
Operation
Register a voice tag.
Play a voice tag.
1 Enter Bluetooth mode
KDC-U7046BT KDC-U7046BTL
Press the [ ] button.
“Register”
“Check”*
“Delete”*
Delete a voice tag.
KDC-U6046 KDC-U6046L
*Displayed only when a name for which a voice tag has
been registered is selected.
Press the [FNC] button for at least 1 second.
“BT MODE” is displayed.
Selecting “Register” (Regist)
2 Enter Function setting mode
Press the [FNC] button.
6 Register a voice tag (first)
Press the [ENTER] button. When you hear a
beep, speak the voice tag within 2 seconds.
3 Select Bluetooth Firmware update mode
The item can be selected and determined as
follows.
”Settings” ➜“Detailed Settings” ➜“BT F/W
Update”
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
The firmware version appears.
7 Confirm the voice tag (second)
Press the [ENTER] button. When you hear a
beep, speak the same voice tag again within 2
seconds.
“Completed” is displayed.
8 Exit Function setting mode
Press the [
] button for at least 1 second.
4 Exit Bluetooth mode
Press the [SRC] button.
Return to step 2. You can register another voice tag
continuously.
⁄
⁄
• For how to update the firmware, access our web site.
• If your voice cannot be recognized, a message is displayed.
(Refer to <Troubleshooting Guide> page 36)
Pressing the [ENTER] button allows you to retry voice input.
Selecting “Check” (Play)
Function of KCA-BT200 (Optional Accessory)
6 Press the [ENTER] button.
Play the registered voice and return to step 2.
Adding a voice dialing command
Add a voice tag to the phonebook for voice dialing.
You can register up to 35 voice tags.
Selecting “Delete” (Delete)
6 Delete a voice tag
Press the [ENTER] button.
1 Enter Bluetooth mode
Press the [FNC] button for at least 1 second.
“BT MODE” is displayed.
7 Turn the Control knob to select “YES”, and then
press the [ENTER] button.
2 Enter Function setting mode
Press the [FNC] button.
Exit Bluetooth mode
Press the [SRC] button.
3 Select Phonebook name edit mode
The item can be selected and determined as
follows.
”Settings” ➜“Voice Tag” ➜“PB Name Edit”
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
4 Search for the name to register
Turn the Control knob to select name, and then
press the [ENTER] button.
If a voice tag has already been registered for a
name, “*” is displayed before the name.
English
|
29
Function of KDC-U7046BT/ KDC-U7046BTL/ KCA-BT200 (Optional Accessory)
Bluetooth Setup
Function of KCA-BT200 (Optional Accessory)
Setting a Voice Command for
Category
Add a voice tag to the phone number category
(type) for voice calling.
1 Enter Bluetooth mode
Press the [FNC] button for at least 1 second.
“BT MODE” is displayed.
2 Enter Function setting mode
Press the [FNC] button.
3 Select Phone Number type edit mode
The item can be selected and determined as
follows.
”Settings” ➜“Voice Tag” ➜“PN Type Edit”
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
4 Enter Phone Number type edit mode
Press the [ENTER] button.
5 Select the category (type) you wish to set
Turn the Control knob to select desired
category name, and then press the [ENTER]
button.
“General”/ “Home”/ “Office”/ “Mobile”/ “Other”
6 Select a mode
Turn the Control knob.
Display
Operation
“Register”
“Check”*
“Delete”*
Register a voice tag.
Play a voice tag.
Delete a voice tag.
*Displayed only when a name for which a voice tag has
been registered is selected.
7 Register the category (type) by performing
steps 6 to 8 in <Adding a voice dialing
command> (page 29).
8 Exit Bluetooth mode
Press the [SRC] button.
⁄
• Set the voice tag for all the 5 categories. If the voice tag is
not registered for all the categories, the Phonebook may
not be recalled by voice command.
|
30 KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L
Function of KDC-U7046BT/ KDC-U7046BTL/ KCA-BT200 (Optional Accessory)
SMS (Short Message Service)
Displaying the SMS
Downloading the SMS
The SMS received by the cell-phone is displayed on
the receiver.
Download the short message (SMS) received by the
cell-phone so that it can be read on this unit.
A newly received message is displayed.
1 Enter Bluetooth mode
KDC-U7046BT KDC-U7046BTL
Press the [ ] button.
¤
• To prevent car accidents, the driver should not read the
SMS while driving.
KDC-U6046 KDC-U6046L
Press the [FNC] button for at least 1 second.
“BT MODE” is displayed.
When a new message arrives
“SMS Received” is displayed.
The display disappears with any operations.
2 Enter Function setting mode
Press the [FNC] button.
Displaying the SMS
3 Select SMS download mode
The item can be selected and determined as
follows.
”Settings” ➜“SMS Download”
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
1 Enter SMS Inbox mode
KDC-U7046BT KDC-U7046BTL
Press the [
] button for at least 1 second.
KDC-U6046 KDC-U6046L
1) Press the [FNC] button for at least 1 second.
2) Press the [FNC] button.
3) The item can be selected and determined as
follows.
”Settings” ➜“SMS Inbox”
To select the item, turn the Control knob.
To determine the item, press the [ENTER]
button.
4 Start downloading
Press the [ENTER] button.
“SMS Downloading” is displayed.
When the downloading finishes, “Completed” is
displayed.
5 Exit Bluetooth mode
Press the [SRC] button.
2 Select a message
Turn the Control knob.
⁄
Each press of the [ENTER] button ( KDC-U7046BT
KDC-U7046BTL )/ [DISP] button ( KDC-U6046
KDC-U6046L ) switches between displaying
the telephone number or name and message
reception date.
• The cell-phone must be able to transmit the SMS using
Bluetooth. Setting on the cell-phone may be required. If
the cell-phone does not support SMS function, the SMS
download item in Function Control mode is not displayed.
• When the SMS is downloaded from the cell-phone, the
unopened messages in the cell-phone are opened.
• The up to 75 already-read and unread short messages
respectively can be downloaded.
3 Display the text
Press the [ENTER] button.
Turn the Control knob to scroll through the
message.
Press the [ENTER] button to return to the message
list screen.
4 Exit Bluetooth mode
Press the [SRC] button.
⁄
• The unopened message is displayed at the beginning of the
list. Other messages are displayed in the order of reception.
• The SMS that are received when the cell-phone is not linked
with Bluetooth cannot be displayed. Download the SMS.
• The short message cannot be displayed during
downloading the SMS.
English
|
31
Basic Operations of remote control
Hands-free phone control
VOL
Making a call
SRC
• Enter Bluetooth mode: [
]
• Select a dialing method: [5]/[∞] ➜ [ENT]
• Number dial input:
ATT
ENT
5/∞
Input a digit: [0] – [9]
Input “+”: [¢]
EXIT
AM
AUD
FM
Input “#”: [FM]
Input “*”: [AM]
Clear the entered phone number: [4]
• Make a call: [DIRECT]
0 — 9
Receiving a call
• Answer the call: [
DIRECT
]
Call waiting
• Answer Another Incoming Call with the Current
Call Suspended: [
]
General control
During a call
• End the call: [SRC]
• Volume control: [VOL]
• Source selection: [SRC]
• Volume reduction: [ATT]
Preparing the remote control unit
Pull the battery sheet out from the
remote control unit to the direction of
the arrow.
When the button is pressed again, the volume returns to
the previous level.
• Return to previous item: [
• Exit from mode: [EXIT]
• Selection of item: [5]/[∞]
• Determination: [ENT]
]
Changing the battery of the remote control
unit
• Enter Audio Control mode: [AUD]
Use a commercially available
button battery (CR2025).
Insert the battery with the +
and – poles aligned properly,
following the illustration
inside the case.
Keep on slide
In Tuner source
• Band selection: [FM]/[AM]
• Station selection: [4]/[¢]
• Recall preset stations: [1] — [6]
CR2025
(+side)
Pull out
In CD/Audio file source
• Music selection: [4]/[¢]
• Folder selection: [FM]/[AM]
• Pause/Play: [ENT]
¤ CAUTION
• Enter Music search mode: [5]/[∞]
• Movement between folders/files during Music
search mode: [5]/[∞]
• Keep battery out of reach of children and in
original package until ready to use. Dispose of
used batteries promptly. If swallowed contact
physician immediately.
• Return to previous folder: [
]
• Do not leave the battery near fire or under direct
sunlight. A fire, explosion or excessive heat
generation may result.
• Do not set the remote control in hot places such
as on the dashboard.
• Danger of explosion if Lithium battery is
incorrectly replaced. Replace only with the same
or equivalent type.
In iPod source
• Enter Music search mode: [5]/[∞]
• Movement between items during Music search
mode: [5]/[∞]
• Return to previous item: [
]
|
32 KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L
Appendix
• When connecting the USB device, usage of the
CA-U1EX (option) is recommended.
Normal playback is not guaranteed when a cable
other than the USB compatible cable is used.
Connecting a cable whose total length is longer
than 5 m can result in abnormal playback.
About Audio file
•
•
•
•
Playable Audio file
AAC-LC (.m4a), MP3 (.mp3), WMA (.wma)
Playable disc media
CD-R/RW/ROM
Playable disc file format
ISO 9660 Level 1/2, Joliet, Romeo, Long file name.
iPod/iPhone that can be connected to this
unit
Made for
• iPod nano (1st generation) • iPod nano (2nd generation)
• iPod nano (3rd generation) • iPod nano (4th generation)
• iPod nano (5th generation) • iPod with video
Playable USB device
USB mass storage class
Playable USB device file system
FAT16, FAT32
•
Even if the audio files comply with the standards listed
above, the play may be impossible depending on the
types or conditions of media or device.
• iPod classic
• iPod touch (1st generation)
• iPod touch (2nd generation)
Works with
•
Playing order of the Audio file
In the example of folder/file tree shown below, the
files are played in the order from ① to ⑩.
<
v
: Folder
Folder
CD
(ꢂ)
:
A
udiofile
vꢀ
ꢁ
• Update iPod/iPhone software to the latest version.
ꢃ
vꢆ
vꢇ
• Type of control available varies depending on the
type of connected iPod. See www.kenwood.com/
cs/ce/ipod/ for further details.
• The word “iPod” appearing in this manual indicates
the iPod or the iPhone connected with the iPod
connection cable* (optional accessory).
ꢅ
vꢄ
ꢈ
vꢉ
v.
* Not supported model KCA-iP500.
• Refer to the web site for connectable iPod and iPod
connection cable.
An online manual about audio files is put on the site,
www.kenwood.com/cs/ce/audiofile/. On this online
manual, detailed information and notes which are not
written in this manual are provided. Make sure to read
through the online manual as well.
⁄
• If you start playback after connecting the iPod, the
music that was playing on the iPod is played first.
In this case, “RESUMING” is displayed without
displaying a folder name, etc. Changing the browse
item will display a correct title, etc.
⁄
•
In this manual, the word “USB device” is used for flash
memories and digital audio players which have USB
terminals.
• You cannot operate iPod if “KENWOOD” or “✓”
displayed on iPod.
About USB device
• When the USB device is connected to this unit,
it can be charged up provided that this unit is
powered.
• Install the USB device in the place where it will not
prevent you from driving your vehicle properly.
• You cannot connect a USB device via a USB hub and
Multi Card Reader.
• Save backups of the audio files used with this unit.
The files can be erased depending on the operating
conditions of the USB device.
We shall have no compensation for any damage
arising out of erasure of the stored data.
• No USB device comes with this unit. You need to
purchase a commercially available USB device.
English
|
33
Appendix
KDC-U7046BT KDC-U7046BTL
About “KENWOOD Music Editor”
• This unit supports the PC application “KENWOOD
Music Editor Lite ver1.0” or later.
• When you use the audio file with database
information added by the “KENWOOD Music Editor
Lite ver1.0”, you can search a file by title, album or
artist name using the <Music Search> (page 9).
About the Cell-Phone
This unit conforms to the following Bluetooth
specifications:
Version
Profile
Bluetooth Standard Ver. 2.1 + EDR
HFP (Hands Free Profile)
OPP (Object Push Profile)
PBAP (Phonebook Access Profile)
SYNC (Synchronization Profile)
• In the Instruction manual, the term “Music Editor
media” is used to mean the device that contains
audio files with database information added with
KENWOOD Music Editor.
• “KENWOOD Music Editor Lite ver1.0” is available from
the following web site:
For the cell-phones verified for compatibility, access
the following URL:
⁄
•
• For further information on “KENWOOD Music Editor
Lite ver1.0”, refer to the site above or the application
help.
The units supporting the Bluetooth function have been
certified for conformity with the Bluetooth Standard
following the procedure prescribed by Bluetooth
SIG. However, it may be impossible for such units to
communicate with your cell-phone depending on its type.
HFP is a profile used to make a hands-free call.
OPP is a profile used to transfer data such as a phone book
between units.
•
•
KDC-U7046BT KDC-U7046BTL
About the Bluetooth Audio player
This unit conforms to the following Bluetooth
specifications:
Version
Profile
Bluetooth Standard Ver. 2.1 + EDR
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control Profile)
⁄
•
A2DP is a profile designed to transfer the music from an
audio player.
•
AVRCP is a profile designed to control playback and
selection of music by an audio player.
|
34 KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L
The marking of products using lasers (Except for some
areas)
• The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks
by Kenwood Corporation is under license. Other
trademarks and trade names are those of their
respective owners.
• The “AAC” logo is a trademark of Dolby Laboratories.
• iPod is a trademark of Apple Inc., registered in the U.S.
and other countries.
CLASS 1
LASER PRODUCT
The label is attached to the chassis/case and says that the component
uses laser beams that have been classified as Class 1. It means that the
unit is utilizing laser beams that are of a weaker class. There is no danger
of hazardous radiation outside the unit.
• iPhone is a trademark of Apple Inc.
• “Made for iPod” means that an electronic accessory
has been designed to connect specifically to iPod and
has been certified by the developer to meet Apple
performance standards.
• “Works with iPhone” means that an electronic
accessory has been designed to connect specifically
to iPhone and has been certified by the developer to
meet Apple performance standards.
• Apple is not responsible for the operation of this
device or its compliance with safety and regulatory
standards.
English
|
35
Troubleshooting Guide
Some functions of this unit may be disabled by
some settings made on this unit.
The messages shown below display your
systems condition.
TOC Error:
• No disc has been loaded in the disc
magazine.
• The CD is quite dirty. The CD is upside-
down. The CD is scratched a lot.
!
!
Cannot set up Display.
40 Demo Mode of <Function setting> (page 15) is not
set to Off.
Error 05:
Error 77:
The disc is unreadable.
• Cannot set up the subwoofer.
• Cannot set up the low pass filter.
• No output from the subwoofer.
“SubWoofer” of <Audio Control> (page 7) is not set to
On.
The unit is malfunctioning for some reason.
➪ Press the reset button on the unit. If the
“Error 77” code does not disappear, consult
your nearest service center.
Error 99:
Something is wrong with the disc magazine.
Or the unit is malfunctioning for some reason.
➪ Check the disc magazine. And then press
the reset button on the unit. If the “Error
99” code does not disappear, consult your
nearest service center.
!
Cannot set up the subwoofer Phase.
“LPF SubWoofer ADJ” of <Audio Control> (page 7) is
set to “Through”.
What might seem to be a malfunction in your unit
may just be the result of slight misoperation or
miswiring. Before calling service, first check the
following table for possible problems.
IN (Blink):
The CD player section is not operating
properly.
➪ Reinsert the CD. If the CD cannot be
ejected or the display continues to flash
even when the CD has been properly
reinserted, please switch off the power
and consult your nearest service center.
General
? The Key beep does not sound.
✔
The preout jack is being used.
☞
The Key beep cannot be output from the preout
jack.
Protect (Blink): The speaker wire has a short-circuit or
touches the chassis of the vehicle, and then
the protection function is activated.
Tuner source
➪ Wire or insulate the speaker cable properly
and press the reset button. If the “Protect”
code does not disappear, consult your
nearest service center.
? Radio reception is poor.
✔
The car antenna is not extended.
☞
Pull the antenna out all the way.
Unsupported File:
Disc source
An Audio file is played with a format that this
unit can’t support.
? The specified disc does not play, but another one
plays instead.
Copy Protection:
✔
✔
The specified CD is quite dirty.
A copy-protected file is played.
☞
Clean the CD, referring to the CD cleaning of the
section on <Handling CDs> (page 3).
Read Error:
The file system of the connected USB device
is broken.
➪ Copy the files and folders for the USB
device again. If the error message is still
displayed, initialize the USB device or use
other USB devices.
The disc is severely scratched.
Try another disc instead.
☞
Audio file source
? The sound skips when an Audio file is being
No Device:
N/A Device:
The USB device is selected as a source
although no USB device is connected.
➪ Change the source to any source other
than USB. Connect an USB device, and
change the source to USB again.
played.
✔
✔
The media is scratched or dirty.
☞
Clean the media, referring to the CD cleaning of
the section on <Handling CDs> (page 3).
The recording condition is bad.
Record the media again or use another media.
☞
• An unsupported USB device is connected.
• Connection to the iPod has failed.
➪ Check that the connected iPod is an iPod
that is supported. See <About Audio file>
(page 33) for information on supported
iPods.
|
36 KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L
No Music Data/Error 15:
• The connected USB device contains no
Too Long:
The word or utterance is too long to be
recognized.
playable audio file.
• Media was played that does not have data
recorded that the unit can play.
No Phonebook: Data is not contained in the phone book.
No Message: No short message in In Box.
USB ERROR:
iPod Error:
Some trouble may have occurred to the
connected USB device.
➪ Remove the USB device, then cycle the
power switch to ON. If the same display is
repeated, use another USB device.
No Record:
The voice tag is not registered in the
phonebook.
Memory Full: The number of voice tags reaches the
maximum number to be registered in the
phonebook.
Connection to the iPod has failed.
➪ Remove the USB device and then
reconnect it.
➪ Confirm that the software for the iPod is
the latest version.
Favorite: No Memory:
The procedure is not registered to Favorite
Preset Memory
No Access:
No Voice:
The procedure preset with Favorite Control
cannot be available. The preset content may
not be recalled depending on the selected
source or mode.
USB REMOVE (Blink):
The Remove mode has been selected for the
USB device/iPod. You can remove the USB
device/iPod safely.
No call.
No Number:
No Data:
• The calling party does not notify a caller ID.
• There is no phone number data.
• There is no outgoing call list.
• There is no incoming call list.
• There is no missed call list.
• There is no phone book list.
No Entry:
The cell-phone has not been registered
(pairing).
HF Disconnect: The unit cannot communicate with the cell-
phone.
HF Error 07:
The memory cannot be accessed.
➪ Turn off the power and on again. If this
message still appears, press the reset
button on the control unit.
HF Error 68:
The unit cannot communicate with the cell-
phone.
➪ Turn off the power and on again. If this
message still appears, press the reset
button on the control unit.
Unknown:
The Bluetooth device cannot be detected.
Device Full:
5 Bluetooth device have already been
registered. No more Bluetooth devices are
registered.
PIN Code NG: The PIN code is wrong.
Connect NG: The unit cannot be connected to the device.
Pairing Failed: Pairing error.
Err No Matching:
The voice tag is wrong. Voice cannot be
recognized because of an unregistered voice
tag, etc.
Too Soft:
Voice is too small and cannot be recognized.
Voice is too large to be recognized.
Too Loud:
English
|
37
Specifications
FM tuner section
CD player section
Frequency range
200 kHz step : 87.9 MHz – 107.9 MHz
Laser diode
: GaAlAs
50 kHz step : 87.5 MHz – 108.0 MHz
Usable sensitivity (S/N = 30dB)
: 9.3dBf (0.8 μV/75 Ω)
Quieting Sensitivity (S/N = 50dB)
: 15.2dBf (1.6 μV/75 Ω)
Frequency response ( 3 dB)
: 30 Hz – 15 kHz
Signal to Noise ratio (MONO)
: 70 dB
Selectivity ( 400 kHz)
: ≥ 80 dB
Stereo separation (1 kHz)
: 40 dB
Digital filter (D/A)
: 8 Times Over Sampling
D/A Converter
: 24 Bit
Spindle speed
: 500 – 200 rpm (CLV)
Wow & Flutter
: Below Measurable Limit
Frequency response ( 1 dB)
: 10 Hz – 20 kHz
Total harmonic distortion (1 kHz)
: 0.008 %
Signal to Noise ratio (1 kHz)
: 105 dB
Dynamic range
: 93 dB
MP3 decode
: Compliant with MPEG-1/2 Audio Layer-3
WMA decode
: Compliant with Windows Media Audio
AM tuner section
Frequency range
10 kHz step : 530 kHz – 1700 kHz
9 kHz step : 531 kHz – 1611 kHz
Usable sensitivity (S/N = 20dB)
: 28 dBμ (25 μV)
AAC decode
: AAC-LC “.m4a” files
Bluetooth section
(KDC-U7046BT/ KDC-U7046BTL)
USB Interface
USB Standard
: USB1.1/ 2.0 (Full speed)
File System
: FAT16/ 32
Maximum Supply current
: 500 mA
MP3 decode
: Compliant with MPEG-1/2 Audio Layer-3
WMA decode
: Compliant with Windows Media Audio
AAC decode
: AAC-LC “.m4a” files
Version
: Bluetooth Ver. 2.1 + EDR Certified
Frequency range
: 2.402 – 2.480 GHz
Output Power
: +4dBm (MAX), 0dBm (AVE) Power Class 2
Maximum Communication range
: Line of sight approx.10m (32.8 ft)
Profiles
: HFP (Hands Free Profile)
: HSP (Headset Profile)
: SPP (Serial Port Profile)
: A2DP (Advanced Audio Distribution Profile)
: AVRCP (Audio/Video Remote Control Profile)
: PBAP (Phonebook Access Profile)
: OPP (Object Push Profile)
: SYNC (Synchronization Profile)
: MAP (Message Access Profile )
Audio section
Maximum output power
: 50 W x 4
Full Bandwidth Power (at less than 1% THD)
: 22 W x 4
Speaker Impedance
: 4 – 8 Ω
Tone action
Bass : 100 Hz 8 dB
Middle : 1 kHz 8 dB
Treble : 12.5 kHz 8 dB
Preout level / Load (CD)
: 2500 mV/10 kΩ
Preout impedance
: ≤ 600 Ω
|
38 KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L
Auxiliary input
Frequency response ( 3 dB)
: 20 Hz – 20 kHz
Input Maximum Voltage
: 1200 mV
Input Impedance
: 10 kΩ
General
Operating voltage
KDC-U7046BT/ KDC-U7046BTL
: 14.4 V (10.5 – 16V allowable)
KDC-U6046/ KDC-U6046L
: 14.4 V (11 – 16V allowable)
Maximum Current consumption
: 10 A
Installation Size (W x H x D)
: 182 x 53 x 155 mm
Weight
: 1.3 kg
Specifications subject to change without notice.
English
|
39
This symbol mark indicates that Kenwood
manufactured this product so as to
decrease harmful influence on the
environment.
|