Motorola A1200
WAP, MMS and IMAP4 Email Service Setup Guide
All Motorola A1200 purchased from CSL outlets are already programmed with the standard setting of
@1010 or One2Free Zone. Should you wish to make a new setting or lose your original one in any
circumstances, please follow the procedures below. This service allows you to access in Hong Kong
or overseas. When you access the service from overseas, roaming charges will be incurred.
(I)
Setup for Standard Local and Overseas WAP services
1. Tap “
” enter main menu and according to the following step to select “Setup” ꢀ “Data
Network” ꢀ Select profile to be edited ꢀ “ ” ꢀ “Edit” ꢀ input the following parameters in
table.
GPRS / CSD (local)
CSD (Overseas) only
CSL CSD Overseas
Leave it blank
Services
CSL
hkcsl
Profile name
GPRS setting APN
User name
Leave it blank
Leave it blank
Password
15 min
Off
Timeout
192.168.59.51
Primary gateway IP
Port
8080
Secondary gateway IP
Leave it blank
0
Port
ꢁ
DNS server
CSD Setting
Leave it blank
Leave it blank
(1)
(2)
179111
ISDN
+852179112
Modem
Dial in number
Query at Logon
User name
Password
Baud rate
Line type
Timeout
ꢁ
Leave it blank
Leave it blank
9600
5 min
ꢁ
DNS server
Leave it blank
Leave it blank
(1)
(2)
2. When completed, tap “Save” then “ ” back to main menu. .
3. Tap “ ” ꢀ “Browser” icon ꢀ “ ” ꢀ “Setup” ꢀ “Profiles” ꢀ select any one of the profiles
ꢀ “ ”ꢀ “Edit” ꢀ input the following parameters in table.
(1010 customer)
(One2Free customer)
(1010 customer)
Profile name
Homepage:
Network link
@1010
1010 Overseas CSD
One2Free Zone
O2F Overseas CSD
CSL CSD Overseas
(One2Free customer)
CSL
4. When complete, tap “Save” ꢀ “ ” ꢀ select the profile as default (e.g.: @1010 or One2Free
Zone) ꢀ “Save” ꢀ tap “ ” to quit.
Note: For switching the data connection from CSD to GPRS in WAP browsing, the user requires to exit the
WAP browser and re-enters again while GPRS is in coverage.
(III) Setup for IMAP4 Email Account
Setting in part I must be created before.
1. Tap
“
”
enter main menu and according to following step to select “Email” icon ꢀ
“
” ꢀ “Mailbox Setup” ꢀ “New” ꢀ Tap “Setup Manually” ꢀ “OK” ꢀ input the
following parameters in table:
Mailbox
Name
Mail@1010
(1010 customer)
mail.csl1010.com
O2F Email
(One2Free customer)
mail.one2free.com
Send Setup
Server
Port
25
Email
Where xxxxxxxx is your mobile phone number
(User define)
ꢃ Off
ꢂ
Nickname
Authentication
Same as Receive Setup
Use SSL
ꢃ No
IMAP
Receive
Setup
imap.csl1010.com
imap.one2free.com
Server
Port
143
xxxxxxxx (Your mobile phone number)
User Name
xxxxxx (User define)
Password
xxxxxx (Same as user define)
Re-enter Password
Check All Folders
Save Special Folder
Incoming Message Size
Limit
ꢁ
ꢁ
64K
ꢃ No
Use SSL
ꢁ
Signature
Setup
Connection
Setup
Add signature to all
outgoing massages
Profile
CSL
2. When complete, tap “OK” ꢀ “ ” ꢀ Tap “Set Default Mailbox” ꢀ Select the edited profile ꢀ
ap “OK” ꢀ Tap “ ” to Exit
T
|