ELECTRIC DOWNDRAFT COOKTOP
PRODUCT DIMENSIONS
INCHES
CENTIMETERS
73.3 .2
53.7 .2
25.4
P
Q
7
1
A
B
C
D
F
28 /8
/16
3
1
21 /8
/16
10
3
6 /8
16.2
1
16 /2
41.9
G
H
J
2 min
5.1 min
44.5 min
31.8
A
1
17 /2 min
C
B
1
12 /2
G
1
K
L2
M
P
Q
12 /2
31.8
D
F
2 min
5.1 min
11.7
5
4 /8
3
29 /4
75.9
22
55.9
MODEL SKUs
JED8430BDB
JED8430BDF
JED8430BDN
JED8430BDS
3
M
H
K
L
J
Style of product may vary from picture
NOTES:
1. Where possible, 6" (15.2 cm) is recommended for motor blower service. Minimum clearance of 1" (2.5 cm)
is required to sidewalls and 3/4" (1.9cm) to rear wall.
2. Provide 2" minimum (5.1 cm) cabinet clearance to motor for cooling purpose.
3. Unit may be safely installed as near as 0" (0 cm) from a side wall if space limitations requires.
However, a side clearance of at least 6" (15.24 cm) is recommended for optimum ventilation.
4. Vents up to 60 equivalent feet.
5. This appliance has been designed in accordance with the requirements of various safety agencies and comply
with the maximum allowable wood cabinet temperatures of 194 F. If these appliances are installed with cabinets
˚
that have a lower working temperature than 194 F, discoloration, delamination or melting may occur.
˚
Electrical requirements: Provide for 120/240 or 120/208 VAC, 60 Hz. The unit must be properly circuitprotected
and wired according to local electrical codes.
Important: Because of continuing product improvements, Jenn-Air® reserves the right to change specifications without notice. Dimensional specifications are provided for
planning purposes only. For complete details see installation instructions that accompany each product before selecting cabinetry, making cutouts or beginning installation.
|